Skroutz.cy

Isomat Multifill-Epoxy Thixo Tile Joint Filler Epoxy / 2 Components 3kg
Putty Fillers

Isomat Multifill-Epoxy Thixo Tile Joint Filler Epoxy / 2 Components 3kg

The two-component Isomat Multifill-Epoxy Thixo epoxy grout is used for grouting joints 1.5–10 mm wide and for bonding wall and floor tiles. It is suitable for swimming pools, kitchens and industrial...

The two-component Isomat Multifill-Epoxy Thixo epoxy grout is used for grouting joints 1.5–10 mm wide and for bonding wall and floor tiles. It is suitable for swimming pools, kitchens and industrial areas where resistance to chemical and mechanical stress is required.

Once cured, it offers high compressive and flexural strength, as well as high adhesion. It...

See Description & Specifications See Description & Specifications

Learn more about invoicing
Questions (1)
Review the product
Product report

Description & Specifications

The two-component Isomat Multifill-Epoxy Thixo epoxy grout is used for grouting joints 1.5–10 mm wide and for bonding wall and floor tiles. It is suitable for swimming pools, kitchens and industrial areas where resistance to chemical and mechanical stress is required.

Once cured, it offers high compressive and flexural strength, as well as high adhesion. It is resistant to acids, alkalis, detergents, seawater and salt water, and is suitable for surfaces that come into contact with food. It is classified as RG grout under EN 13888 and as an R2T adhesive under EN 12004.

  • Type: Two-component epoxy grout and tile adhesive
  • Colour: White
  • Weight: 3 kg
  • Joint width: 1.5–10 mm
  • Resistance: To chemical and mechanical stress, acids, alkalis, detergents, seawater and salt water
  • Suitable for: Swimming pools, kitchens, industrial areas and surfaces in contact with food
  • Standards: RG under EN 13888, R2T under EN 12004
  • Consumption: 0.2–5.0 kg/m²
  • Operating temperature range: -30 °C to +80 °C
  • Application temperature: +15 °C to +25 °C
  • Minimum curing temperature: +10 °C
  • Mixing ratio: 100:6.5 by weight
  • Pot life: Approximately 45 min at +23 °C
  • Walkability: After 16 h at +23 °C
  • Time to full load: After 7 days at +23 °C
  • Packaging: A+B set

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Tile Joint Filler
Attributes
Epoxy, 2 Components
Colour
White
Application Surface
Plasterboard
Sanding Capability
-
No Shrinkage / Crack Resistance
No

Quantity

Weight
3 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

39,00 €
Free to a Skroutz Point
or   4,50 €   shipping cost