The 3M HF25-S ice machine replacement filter uses a membrane and activated carbon block with I.M.P.A.C.T. technology. It reduces particles and sediment down to 1 μm, as well as chlorine taste and odor, while its built-in scale inhibitor helps limit scale buildup on the ice machine’s pumps, valves, and seals.
The filter is designed for ice machines and is also used in beverage and coffee machines, water coolers, and vending machines. It connects to the 3M ICE125-S system and 3M High Flow series systems. It can be replaced with a quarter-turn, without tools or contact with the filter media. Replacement is recommended every 12 months, or sooner if the flow rate decreases noticeably.
- Type: Replacement water filter
- Use: Ice machine
- Filtration technology: I.M.P.A.C.T. membrane and activated carbon block with scale inhibitor
- Micron rating: 1 μm
- Reduces: Particles, sediment, chlorine taste and odor, and scale
- Flow rate: 5.7 liters/minute
- Capacity: 37,854 liters
- Operating pressure: 1.7–8.6 bar
- Water temperature: 4.4–37.8 °C; cold water only
- Service life: 12 months
- Connection: SQC (Sanitary Quick Change), quarter-turn replacement
- Installation: Under the counter or inside the machine
- Compatibility: 3M ICE125-S system and 3M High Flow series systems
- Height: 34.6 cm
- Diameter: 8.4 cm
- Color: White
- Certification: NSF/ANSI 42
- Country of manufacture: USA
- Package contents: 1 replacement filter
- Product Number
- HF25-S
- Usage
- Ice Machine
- Spare Part
- Yes
- Filtration Technology
- Softening / Limescale Reduction
- Reverse Osmosis
- No
- Permeability / Density (Micron)
- 1 μm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.