Skroutz.cy

Hager Automatic Circuit Breaker 20A Single-pole AC NDN120A
Automatic Circuit Breaker

Hager Automatic Circuit Breaker 20A Single-pole AC NDN120A

The Hager Automatic Circuit Breaker 10kA D 20A 1P NDN120A is the ideal solution for the protection and control of electrical circuits. Designed for maximum safety and reliability, it offers excellent...

The Hager Automatic Circuit Breaker 10kA D 20A 1P NDN120A is the ideal solution for the protection and control of electrical circuits. Designed for maximum safety and reliability, it offers excellent performance against short circuits and overloads, while allowing circuit isolation for maintenance work.

  • Rated current: 20A
  • Curve: D
  • Rated voltage: 230/400V AC...
See full description See full description
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The Hager Automatic Circuit Breaker 10kA D 20A 1P NDN120A is the ideal solution for the protection and control of electrical circuits. Designed for maximum safety and reliability, it offers excellent performance against short circuits and overloads, while allowing circuit isolation for maintenance work.

  • Rated current: 20A
  • Curve: D
  • Rated voltage: 230/400V AC
  • Rated short-circuit breaking capacity at 230V AC: 10kA
  • Surge withstand voltage: 6000V
  • Protection index: IP20
  • Product lifespan, electrical endurance in operating cycles: 4000
  • Number of mechanical operations: 20000
  • Integrated label holder.
  • Cable connection cross-section at the output with screw, for stranded cable: 1 / 25 mm²
  • Cable connection cross-section at the output with screw, for solid cable: 1 / 35 mm²
  • Standard: EN 60898-1, IEC 60947-2
  • Operating temperature: -25…70 °C
  • Dimensions: Height: 83mm, Width: 17.50mm, Depth: 70mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
1
Rated Current
20 A
Operating Curve
Curve D

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve D

It is used for heavy loads with high starting peaks, such as large motors and transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

The Hager Automatic Circuit Breaker 10kA D 20A 1P NDN120A is the ideal solution for the protection and control of electrical circuits. Designed for maximum safety and reliability, it offers excellent performance against short circuits and overloads, while allowing circuit isolation for maintenance work.

  • Rated current: 20A
  • Curve: D
  • Rated voltage: 230/400V AC
  • Rated short-circuit breaking capacity at 230V AC: 10kA
  • Surge withstand voltage: 6000V
  • Protection index: IP20
  • Product lifespan, electrical endurance in operating cycles: 4000
  • Number of mechanical operations: 20000
  • Integrated label holder.
  • Cable connection cross-section at the output with screw, for stranded cable: 1 / 25 mm²
  • Cable connection cross-section at the output with screw, for solid cable: 1 / 35 mm²
  • Standard: EN 60898-1, IEC 60947-2
  • Operating temperature: -25…70 °C
  • Dimensions: Height: 83mm, Width: 17.50mm, Depth: 70mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
1
Rated Current
20 A
Operating Curve
Curve D

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve D

It is used for heavy loads with high starting peaks, such as large motors and transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

9,70 €
5,00 €   shipping cost