Skroutz.cy

Metabo Single-phase Pump Waste Water / Sewage 1.02hp 0251400000
Submersible Water Pumps

Metabo Single-phase Pump Waste Water / Sewage 1.02hp 0251400000

TPS 14000 S Combi Submersible Clean - Dirty Water Pump 770W

  • Rated power: 770W
  • Electrical voltage: 230V
  • Max transfer rate: 14,000 l/h
  • Max head height: 8.5 m
  • Max pressure: 0.85 bar
  • Max immersion depth:...

TPS 14000 S Combi Submersible Clean - Dirty Water Pump 770W

  • Rated power: 770W
  • Electrical voltage: 230V
  • Max transfer rate: 14,000 l/h
  • Max head height: 8.5 m
  • Max pressure: 0.85 bar
  • Max immersion depth: 7 m
  • Max particle size: 20 mm
  • Pump casing: Plastic
  • Outlet: 1 1/2” Female thread
  • Number of wheels: 1
  • Weight: 7.7 Kg
  • Cable length: 10 m

Use of submersible pump...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8.5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
198 00 €
Delivery Fri, 17 Jul - Tue, 21 Jul
12,00 € to a Skroutz Point or 13,00 € to an address
Do you want it with 7,00 € shipping to Skroutz Point?
Sent from Greece
From Stereotiki 4.9 (5)
4.9 (5 reviews)
Greece
See Water Pumps on the page of Stereotiki
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

TPS 14000 S Combi Submersible Clean - Dirty Water Pump 770W

  • Rated power: 770W
  • Electrical voltage: 230V
  • Max transfer rate: 14,000 l/h
  • Max head height: 8.5 m
  • Max pressure: 0.85 bar
  • Max immersion depth: 7 m
  • Max particle size: 20 mm
  • Pump casing: Plastic
  • Outlet: 1 1/2” Female thread
  • Number of wheels: 1
  • Weight: 7.7 Kg
  • Cable length: 10 m

Use of submersible pump for clean water or sewage. Ideal for pumping and recirculating fresh or dirty water from tanks, pools, or flooded basements. Suitable for irrigation from water tanks. Shallow suction at 1 mm (when operating as fresh water pump).

Features:

  • Simple adjustment of the base for optimal pumping.
  • Float switch for automatic operation.
  • Level adjustment for the float switch.
  • Function selection buttons on the plug.
  • Housing made of durable plastic.
  • Suction of particles up to 20 mm (when operating as sewage pump).
  • Connecting angle with multiple adapter.
  • Ergonomic carrying handle.

Package contents:

  • Connecting angle with multiple adapter
  • Float switch

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.02 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
765 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

TPS 14000 S Combi Submersible Clean - Dirty Water Pump 770W

  • Rated power: 770W
  • Electrical voltage: 230V
  • Max transfer rate: 14,000 l/h
  • Max head height: 8.5 m
  • Max pressure: 0.85 bar
  • Max immersion depth: 7 m
  • Max particle size: 20 mm
  • Pump casing: Plastic
  • Outlet: 1 1/2” Female thread
  • Number of wheels: 1
  • Weight: 7.7 Kg
  • Cable length: 10 m

Use of submersible pump for clean water or sewage. Ideal for pumping and recirculating fresh or dirty water from tanks, pools, or flooded basements. Suitable for irrigation from water tanks. Shallow suction at 1 mm (when operating as fresh water pump).

Features:

  • Simple adjustment of the base for optimal pumping.
  • Float switch for automatic operation.
  • Level adjustment for the float switch.
  • Function selection buttons on the plug.
  • Housing made of durable plastic.
  • Suction of particles up to 20 mm (when operating as sewage pump).
  • Connecting angle with multiple adapter.
  • Ergonomic carrying handle.

Package contents:

  • Connecting angle with multiple adapter
  • Float switch

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.02 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
765 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

198,00 €
13,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more