If I had known in advance the amount of time required for installation, I probably would not have gone ahead with the purchase. It is striking that none of the reviews mention the degree of difficulty of the installation, both in terms of the physical strength required — since the return spring of the front arm is quite strong — and the endurance needed to keep the screen steady for quite a while, until you determine the desired height and the exact drilling point on the wall. The presence of a second person during installation is essential, as stated in the instructions. It is worth noting, however, that on 27" screens the mechanism is completely hidden behind them, providing an exceptionally clean and invisible result.

Okay, when you buy it you don’t expect it to have such a wide range of motion. Extremely cheap for what it offers. Plus, it can even hold up to a 24" screen without sagging under the weight

For the money and what it offers, there is nothing better. It easily holds a 32" SAMSUNG weighing 6 kilos.
* The arm at the VESA needs to be tightened well left and right if it's a heavy monitor, so it doesn't tilt forward.

Excellent stand for its price. However, be careful, it requires a lot of planning to install it in a spot that will ultimately suit you. I wanted to place it in a way that nothing would be visible from the front and I managed to do it. It saves me a lot of space compared to the original monitor stand. It's not something incredibly premium but I don't need anything more. The cables indeed don't all fit inside the cover that the stand has, but I used tie wraps and it looks just fine. Be careful when doing the cable management; if you move the monitor and have all the cables pulled tight, they might all get ripped out and cause damage. However, this applies to all stands with such a wide range of movement. Overall, amazing value for money. (Monitor: Samsung 27'' ViewFinity S6)

It was very convenient for me, it holds the Gigabyte GS27QC screen at 3.6 kg at full distance steadily without any problem. It would be good to have someone help you with the assembly.

Installed on a 27" monitor. You will need a 3/8 drill or alternatively 9.5 mm for the screws included in the package. The arm for balance should be tightened all the way - indicator. Before making the holes, you should mark the monitor with the base and note where the desired support position on the wall will be. The base is sturdy vesa 75x75. You will not find the company's brand on the packaging. The cable penetration is only for 2 HDMI cables and the power supply 10/10 excellent product

There is indeed a problem with the stabilization of the screw so that the screen doesn't tilt downwards. I have installed a 27-inch Samsung and with a lot of effort, I have managed to keep it stable, but if I push it a little again, it falls

Although it doesn't look good from the picture, it is actually a very good solution for a 24'' computer monitor. Really, for the price, it is very good.

Very practical bases, I got 2 and it freed up the whole office. It adjusts in every possible way so it's impossible not to find the spot that works for you.

Very satisfied with this particular stand. For 1 year now, absolutely no problems with a heavy 27-inch HP monitor. Recommended!

Sturdy, can be adjusted as you wish, I have installed it on the wall between two desks so I can move the screen depending on which desk I use (so it hasn't stayed fixed, I turn it all the time) and it works perfectly fine with a 27-inch monitor.

Edit: I'm coming back almost a year later to confirm that the stand, with the use I give it (I rotate the monitor very often because I have it placed between two desks and use it on both), still works flawlessly, it was worth every cent I paid and its 5-star rating.

Very stable. I got it for an lg ultrawide, it has its weight but the arm handles it well. I put it on, adjusted the tension of the springs and within 15 minutes it was ready. I will get a second one for my main monitor soon. If you have a desk that is not very stable, it is perfect so that the screen does not wobble. It is very high quality, especially for its price.

I had the same desk mount for 3 years. It now continues to support my brother's monitor. It is the same base but wall-mounted. Excellent construction for its price. Inside includes everything you will need for installation. Make sure to try 2-3 positions that suit you before screwing it in. I would like a little more space in the "arms" to fit the cables. If you have more than 2 it's a bit difficult. It comfortably supports a 27-inch Dell weighing 4.5 kg. I don't want to change its position so I have tightened it fully and it doesn't move at all.

* Positives: sturdy and durable construction, good price.

** Negatives: the "Brateck" logo is nowhere to be found on the box or the product itself. Additionally, and most importantly: my monitor is 32" and weighs 5½ kg, but unfortunately the arm cannot hold the weight in a stable desired position, no matter how much I tighten it. I found a way and made a makeshift solution (extra stand) and managed to make it functional, but overall I was somewhat disappointed that it couldn't handle the mere 5½ kg of my Samsung, even though it is advertised to hold up to 9 kg. For smaller screens, get it without hesitation, for screens at the 32" limit, it may not be the ideal choice.

I have a 27-inch relatively lightweight simple monitor. It fully meets my needs, very convenient. Before you screw it in, you should consider the best position. I will soon buy a second one and without hesitation, I will buy the same one.

Very good arm, no issue with weight once adjusted. I have put a 31-inch ultrawide with no problem!

The stand is good for its price and very durable. The only reason I give it 3 stars is because it cannot support the weight of my Samsung G5 Ultrawide, which weighs 5.6 kilograms, even though the stand claims to support up to 8 kilograms

Unacceptable for the product not to be in its box (of its brand) and for the brand Brateck not to be mentioned anywhere (like the corresponding base that attaches to the desk). On no paper, on no label. Not even on the frame of the base. Nevertheless, the product looks very good but without knowing what it is... Let it just be a packaging issue.

Nowhere on the box or in the instructions does it mention the Brateck brand, but other than that, it is a sturdy construction, just like in the photos.

Very good and stable for its price of 28 euros,
works perfectly with a 32-inch screen no matter how you turn it,
solid base and quality materials

Very good screen stand. It is flexible in terms of screen movement, stable in terms of the final position of the screen, and sturdy in terms of construction.

I have had it for about two weeks now and so far it performs as expected. Before purchasing, please note that its installation requires the use of a drilling machine to open holes in the wall.

Very good stand for the 25 euros I got it! It is stable, good quality, and has all the necessary adjustments. I have put a 27-inch Samsung on it and it holds it very well in any position you think of turning it. It does not need an adapter, it fits directly into 100x100.
It really is the best solution compared to desk stands (if you can make 2 holes in the wall), firstly because the screen does not move when you touch the desk, and secondly because it is the cleanest solution since the stand is completely hidden behind.
Inside, it has everything you need, screws, nuts, and an Allen wrench, but you will definitely need a 10mm socket (or a German polygon)

First of all, very economical! The quality is excellent, very sturdy, good plastic, screws all perfect inside!!!

Functionally, you can place your monitor up or down, right or left, as you wish and at a sufficient distance.

There is a screw for how easily it goes up and down, you will adjust it according to the weight of your monitor. I tightened it enough so that even if I accidentally touch it, it won't change its position!!

Ten!!!!