Plastic Texture Rolls suitable for applying continuous repeating patterns on clay and pastes. Made from transparent PMMA plastic with excellent non-stick properties. Non-toxic. Available in various textures that can be purchased according to specific needs.

• Length: 14.50 cm (5.5 inches)
• Diameter: 2.5 cm (1 inch)

Instructions for Use:

1. Mix the paste/clay thoroughly until ready according to the manufacturer's instructions.
2. Stretch the paste/clay onto a textured surface. For optimal results, ensure the surface is smooth and even before applying with the rolls.
3. Depending on the type of paste/clay, it is recommended to dampen the roller to prevent sticking.
4. Move the roller slowly, applying even pressure at all points for a uniform texture.
5. Cut any excess paste/clay with a sharp knife after it has dried to prevent deformation.

Materials:

There are many different pastes and clays on the market, and all can be textured with the right technique. Usually, polymer clay (such as Fimo or Sculpey) is quite easy to work with using these rolls, as they allow easy corrections before baking. If the goal is to create textured bases, it is recommended to use MDF bases, as you can texture the polymer clay directly onto the MDF base and then bake everything together.

For Green Stuff paste, which is particularly sticky, it is advisable to lightly dampen either the paste or the roll with a bit of water before textured application. You can also reduce its stickiness by applying talc or using Vaseline Silicone.

Care Instructions: After completing the use of the rolls, use a cleaning brush and plenty of water to remove any residue if necessary.

Safety: To ensure safety, children should be closely supervised by a responsible adult.