-
Speaker Type: Passive 2-Way Professional Wall-Mount Speaker (Bass-Reflex)
-
Woofers / Midrange: 2 x 6" (152 mm) magnetically shielded drivers
-
Tweeter: 1" (25 mm) titanium dome tweeter in a coaxially symmetric 100° x 80° horn
-
Power: 150W RMS / 300W Program / 600W Peak
-
Frequency Response (-3dB): ~100Hz – 18kHz
-
Frequency Range (-10dB): 62Hz – 20kHz
-
Sensitivity: 94 dB SPL (1W / 1m)
-
Maximum SPL: 116 dB Continuous / 122 dB Peak
-
Nominal Impedance: 8 Ohms (6 Ohms minimum)
-
Crossover Frequency: 1.6 kHz
-
Protection Rating: IP34 (MIL-STD-810 & IEC 60529 resistance to moisture, salt, and UV radiation)
-
Mounting System: Strong-Arm Mount (SAM) wall bracket included
-
Connection Terminals: Removable Phoenix-type screw terminals (4-pin Phoenix)
-
Color / Finish: White (white ABS enclosure with paintable steel grille)
-
Dimensions (W x D x H): 228 x 298 x 419 mm
-
Weight: 5.3 kg per unit
The Electro-Voice EVID 6.2 are high-performance, passive, two-way wall-mounted professional speakers (Commercial/Architectural Speakers), designed for sound installations in indoor and covered outdoor spaces such as restaurants, bars, retail stores, event venues, and theme parks. They feature dual 6-inch (152 mm) low- and mid-frequency transducers with treated-paper cones and magnetic shielding, as well as a 1-inch (25 mm) titanium-diaphragm tweeter with a neodymium magnet, mounted in a Coaxially Symmetric Constant-Directivity horn. The durable ABS polymer enclosure features a Bass-Reflex design, weather-resistance certification (Mil-Std / IP34), and the patented Strong-Arm Mount (SAM) system for easy installation and adjustment.
Basic Features
-
Speaker Type: Passive 2-Way Professional Wall-Mount Speaker (Bass-Reflex)
-
Woofers / Midrange: 2 x 6" (152 mm) magnetically shielded drivers
-
Tweeter: 1" (25 mm) titanium dome tweeter in a coaxially symmetric 100° x 80° horn
-
Power: 150W RMS / 300W Program / 600W Peak
-
Frequency Response (-3dB): ~100Hz – 18kHz
-
Frequency Range (-10dB): 62Hz – 20kHz
-
Sensitivity: 94 dB SPL (1W / 1m)
-
Maximum SPL: 116 dB Continuous / 122 dB Peak
-
Nominal Impedance: 8 Ohms (6 Ohms minimum)
-
Crossover Frequency: 1.6 kHz
-
Protection Rating: IP34 (MIL-STD-810 & IEC 60529 resistance to moisture, salt, and UV radiation)
-
Mounting System: Strong-Arm Mount (SAM) wall bracket included
-
Connection Terminals: Removable Phoenix-type screw terminals (4-pin Phoenix)
-
Color / Finish: White (white ABS enclosure with paintable steel grille)
-
Dimensions (W x D x H): 228 x 298 x 419 mm
-
Weight: 5.3 kg per unit
Dual 6-Inch Drivers & High-Power Architecture
The Electro-Voice EVID 6.2 features two 6-inch (152 mm) low- and mid-frequency drivers. This dual-driver configuration increases the radiating surface area, enabling the speaker to achieve high sound pressure levels (up to 122 dB Peak) with low distortion and extended bass response down to 62 Hz. The drivers also feature magnetic shielding, allowing the speaker to be installed near equipment sensitive to magnetic interference.
Titanium Tweeter & Wide-Dispersion Horn
To reproduce high frequencies up to 20 kHz, the speaker is equipped with a 1-inch (25 mm) titanium-diaphragm tweeter featuring a powerful neodymium magnet. The tweeter is mounted in a Coaxially Symmetric Horn, which provides controlled, even dispersion of 100° horizontal x 80° vertical, covering large areas with clear, balanced sound.
Strong-Arm Mounting System & Weather Resistance
The elliptical enclosure of the EVID 6.2 is made of durable, high-rigidity ABS polymer and features IP34 protection, as well as military-standard (MIL-STD-810) protection against moisture, salt water, and UV radiation. It is easy to install thanks to the patented Strong-Arm Mount (SAM) system, which allows precise adjustment of the speaker’s tilt and rotation, while the wiring runs through the mount for a clean appearance.
Technical Specifications
- Power (RMS)
- 150 W
- Driver Configuration
- 2 No of Drivers
- Sensitivity
- 94 dB
Main Specifications
- Placing
- Wall
- Quantity
- Pair
- Colour
- White
- Functionality
- Passive
- IP Protection Rating
- IP34
- Mounting Bracket
- -
Dimensions
- Height
- -
- Length
- 80 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.