Skroutz.cy

Gardena 19500 Aquasensor Single-phase Water Pump 1.14hp 09049-20
Submersible Water Pumps

Gardena 19500 Aquasensor Single-phase Water Pump 1.14hp 09049-20

Key features:

  • Maximum pump submersion: 7m
  • Cable length: 10m
  • Power: 860W
  • Output: 19500 lit/h
  • Maximum discharge height: 10m
  • Maximum pressure: 1 bar
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    10

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all

User Manual

214 00 €
214 Coins 214 Coins
Delivery Tue, 21 Jul - Thu, 23 Jul
Free shipping cost
Sent from Greece
From M-Max 5.0 (3)
5.0 (3 reviews)
Greece
2 pieces
See Water Pumps on the page of M-Max
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

The Drainage Pump 19500 Aquasensor for Clean / Dirty Water is high-performance and energy-efficient. Whether you want to pump outdoors and clean your garden pond, empty a construction trench filled with rainwater, or clean your basement after a flood due to a malfunction, with this innovative dual-function pump, you can easily pump and transfer both clean and dirty water.

Its motor has a power of 860 W, providing an impressive pumping capacity of 19500 liters of water per hour. With a pressure of 0.95 bar and a maximum submersion depth of 9.5 m, this hybrid pump is particularly effective. The flat suction of the clean water function can remove clean or only slightly dirty water up to 1 mm, which means that afterward, a floor can be wiped very easily.

Innovative 2-in-1 drainage pump for high performance

  • This new type of pump combines drainage for both clean and dirty water in a single device, allowing flexible use in many situations.
  • It is incredibly simple to switch between clean and dirty water pumping functions, and you will have absolutely no problem with dirty hands or accidentally soiling your shoes.
  • It remains waterproof at all times and keeps hands and clothes clean and dry.
  • In the case of murky water containing dirt particles up to 35 mm in size, the 2-in-1 drainage pump easily becomes a dirty water drainage pump by changing the mode of operation. This is ideal for draining water with coarse dirt particles, among many other wastewater pumping applications.

Effective and innovative 2in1 technology with LED Aquasensor

This modern Drainage Pump 19500 Aquasensor for Clean / Dirty Water is particularly powerful and efficient thanks to the new Aquasensor system and the 860 W motor with a maximum pumping capacity of 19500 liters per hour.

Extremely powerful and versatile

With a maximum submersion depth of 9.5 m at a pressure of 0.95 bar, the pump is extremely powerful and suitable for various applications such as water construction sites, flooded basements, swimming pools, or contaminated ponds.

First-class construction, highly reliable and user-friendly

An intelligent design, high-quality construction with stainless steel elements and ceramic coating. The easy change of use with the help of the carrying handle, as well as other features, make this pump easy to use, keeping hands, clothes, and shoes clean and dry.

Easy hose connection system

The 19500 Aquasensor Drainage Pump for Clean / Dirty Water allows flexible connection of hoses with a diameter of 32 mm (1 ¼ "), 38 mm (1 ½") and 50 mm (2 ") and additional connection options with G1 ½" thread.

Top category thanks to high-quality materials

Stainless steel casing and ceramic shaft with triple sealing and oil chamber that ensures maximum durability and long lifespan of the pump.


LED Aquasensor

Another innovative advantage of the pump is the LED Aquasensor system, which can intelligently maintain the required water level. The Aquasensor allows the combined pump to operate in tight spaces and offers adjustable activation and deactivation heights with precision. The water can be measured without direct contact with the sensor, and the level is displayed via a practical LED indicator on the device. Additionally, the Aquasensor offers intuitive touch operation, dry run protection, and blockage protection, as well as useful timer functions. Even more useful is the new one-click hose connection system.

Specifications

  • Maximum pump submersion: 7m
  • Cable length: 10m
  • Power: 860W
  • Output: 19500 l/h
  • Maximum head height: 10m
  • Maximum pressure: 1 bar
  • Maximum liquid temperature: 35 °C
  • Power cable type: H07 RNF
  • Electrical protection category: IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.14 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
855 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
19 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
9.5 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Anetina_Gialouri
    5
    Anetina_Gialouri

    Verified purchase

    With its installation, the removal of the accumulated water was immediate (as the previous pump had burned out and there was water). Very good, but many factors contribute to the purchase regarding which one is suitable for the space, and a specialist should be consulted as it depends on where it will be installed; if it is a basement, both the height the water needs to be lifted and the distance it needs to be transported outside, among other things, must be considered! I am very satisfied with this particular choice and it works perfectly!!!

    Translated from Greek ·
    Did you find this review helpful?
  • Anetina_Gialouri
    5
    Anetina_Gialouri

    With its installation, the removal of the accumulated water was immediate (as the previous pump had burned out and there was water). Very good, but many factors contribute to the purchase regarding which one is suitable for the space, and a specialist should be consulted as it depends on where it will be installed; if it is a basement, both the height the water needs to be lifted and the distance it needs to be transported outside, among other things, must be considered! I am very satisfied with this particular choice and it works perfectly!!!

    Translated from Greek ·
    0
  • See all
Questions (1)

Questions

10 users have this product and can help you

Ask for the product
1 Reply Reply to
See all questions (1)

Description & Specifications

The Drainage Pump 19500 Aquasensor for Clean / Dirty Water is high-performance and energy-efficient. Whether you want to pump outdoors and clean your garden pond, empty a construction trench filled with rainwater, or clean your basement after a flood due to a malfunction, with this innovative dual-function pump, you can easily pump and transfer both clean and dirty water.

Its motor has a power of 860 W, providing an impressive pumping capacity of 19500 liters of water per hour. With a pressure of 0.95 bar and a maximum submersion depth of 9.5 m, this hybrid pump is particularly effective. The flat suction of the clean water function can remove clean or only slightly dirty water up to 1 mm, which means that afterward, a floor can be wiped very easily.

Innovative 2-in-1 drainage pump for high performance

  • This new type of pump combines drainage for both clean and dirty water in a single device, allowing flexible use in many situations.
  • It is incredibly simple to switch between clean and dirty water pumping functions, and you will have absolutely no problem with dirty hands or accidentally soiling your shoes.
  • It remains waterproof at all times and keeps hands and clothes clean and dry.
  • In the case of murky water containing dirt particles up to 35 mm in size, the 2-in-1 drainage pump easily becomes a dirty water drainage pump by changing the mode of operation. This is ideal for draining water with coarse dirt particles, among many other wastewater pumping applications.

Effective and innovative 2in1 technology with LED Aquasensor

This modern Drainage Pump 19500 Aquasensor for Clean / Dirty Water is particularly powerful and efficient thanks to the new Aquasensor system and the 860 W motor with a maximum pumping capacity of 19500 liters per hour.

Extremely powerful and versatile

With a maximum submersion depth of 9.5 m at a pressure of 0.95 bar, the pump is extremely powerful and suitable for various applications such as water construction sites, flooded basements, swimming pools, or contaminated ponds.

First-class construction, highly reliable and user-friendly

An intelligent design, high-quality construction with stainless steel elements and ceramic coating. The easy change of use with the help of the carrying handle, as well as other features, make this pump easy to use, keeping hands, clothes, and shoes clean and dry.

Easy hose connection system

The 19500 Aquasensor Drainage Pump for Clean / Dirty Water allows flexible connection of hoses with a diameter of 32 mm (1 ¼ "), 38 mm (1 ½") and 50 mm (2 ") and additional connection options with G1 ½" thread.

Top category thanks to high-quality materials

Stainless steel casing and ceramic shaft with triple sealing and oil chamber that ensures maximum durability and long lifespan of the pump.


LED Aquasensor

Another innovative advantage of the pump is the LED Aquasensor system, which can intelligently maintain the required water level. The Aquasensor allows the combined pump to operate in tight spaces and offers adjustable activation and deactivation heights with precision. The water can be measured without direct contact with the sensor, and the level is displayed via a practical LED indicator on the device. Additionally, the Aquasensor offers intuitive touch operation, dry run protection, and blockage protection, as well as useful timer functions. Even more useful is the new one-click hose connection system.

Specifications

  • Maximum pump submersion: 7m
  • Cable length: 10m
  • Power: 860W
  • Output: 19500 l/h
  • Maximum head height: 10m
  • Maximum pressure: 1 bar
  • Maximum liquid temperature: 35 °C
  • Power cable type: H07 RNF
  • Electrical protection category: IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.14 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
855 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
19 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
9.5 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
Yes

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Anetina_Gialouri
    5
    Anetina_Gialouri

    Verified purchase

    With its installation, the removal of the accumulated water was immediate (as the previous pump had burned out and there was water). Very good, but many factors contribute to the purchase regarding which one is suitable for the space, and a specialist should be consulted as it depends on where it will be installed; if it is a basement, both the height the water needs to be lifted and the distance it needs to be transported outside, among other things, must be considered! I am very satisfied with this particular choice and it works perfectly!!!

    Translated from Greek ·
    Did you find this review helpful?
  • Anetina_Gialouri
    5
    Anetina_Gialouri

    With its installation, the removal of the accumulated water was immediate (as the previous pump had burned out and there was water). Very good, but many factors contribute to the purchase regarding which one is suitable for the space, and a specialist should be consulted as it depends on where it will be installed; if it is a basement, both the height the water needs to be lifted and the distance it needs to be transported outside, among other things, must be considered! I am very satisfied with this particular choice and it works perfectly!!!

    Translated from Greek ·
    0
  • See all
214,00 €
Free   shipping cost