Skroutz.cy

Gardena 9000 Pump Waste Water / Sewage 0.4hp 09040-20
Submersible Water Pumps

Gardena 9000 Pump Waste Water / Sewage 0.4hp 09040-20

Key features:

  • Power 300 W
  • Maximum pumping capacity 9000 l/h
  • Maximum pressure 0.6 bar
  • Maximum head height 6 m
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    6

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
84 00 €
84 Coins 84 Coins
Delivery Fri, 17 Jul - Tue, 21 Jul
4,00 € to a Skroutz Point or 5,00 € to an address
Do you want it with Free shipping?
Sent from Greece
From M-Max 5.0 (3)
5.0 (3 reviews)
Greece
4 pieces
See Water Pumps on the page of M-Max
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

When a construction trench fills up after a storm or your garden pond needs to be pumped out again, it's time to feel the power of GARDENA pumps and the Dirty Water Submersible Pump 9000. This impressive drainage pump is brought to you by GARDENA, the preferred garden brand for millions of homeowners and gardeners worldwide, with over 40 years of experience in drainage, irrigation, and domestic use pumps. The Dirty Water Submersible Pump 9000 will meet all the challenges of flooding, overflow, and other water-related difficulties. This aesthetically pleasing pump offers high performance with low energy consumption. The motor delivers 300 W of power, combined with a maximum pressure of 0.6 bar and a submersion depth of 6 m, this energy-saving pump can pump up to 9000 liters of water per hour. Dirt particles in the water up to 25 mm can be handled without issues. This durable pump contains a hardened shaft with double sealing to protect the motor underwater. During operation, the GARDENA pump remains stable and secure thanks to its high-quality construction and smart design. Equally smart and useful are the flexible application and connection options. With the GARDENA connection system, pipes with a diameter of 25 mm (1") or 38 mm (1 ½") can be connected without additional accessories. An additional G1 thread will allow the connection of extra pipes, such as the GARDENA Profi system. This makes the Dirty Water Submersible Pump 9000 the ideal companion for all homeowners and gardeners who have a pond, frequently work with construction trenches, or generally have problems with dirty water.

Technical Specifications:

  • Power 300 W
  • Maximum pumping capacity 9000 l/h
  • Maximum pressure 0.6 bar
  • Maximum submersion depth 7 m
  • Maximum delivery height 6 m
  • Maximum liquid temperature 35 °C
  • Cable length 10 m
  • Power cable type H05 RNF
  • Electrical protection class IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Horsepower
0.4 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
300 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6 m

Maximum Head Height: 6


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
6 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

8 users have this product and can help you

Ask for the product

Description & Specifications

When a construction trench fills up after a storm or your garden pond needs to be pumped out again, it's time to feel the power of GARDENA pumps and the Dirty Water Submersible Pump 9000. This impressive drainage pump is brought to you by GARDENA, the preferred garden brand for millions of homeowners and gardeners worldwide, with over 40 years of experience in drainage, irrigation, and domestic use pumps. The Dirty Water Submersible Pump 9000 will meet all the challenges of flooding, overflow, and other water-related difficulties. This aesthetically pleasing pump offers high performance with low energy consumption. The motor delivers 300 W of power, combined with a maximum pressure of 0.6 bar and a submersion depth of 6 m, this energy-saving pump can pump up to 9000 liters of water per hour. Dirt particles in the water up to 25 mm can be handled without issues. This durable pump contains a hardened shaft with double sealing to protect the motor underwater. During operation, the GARDENA pump remains stable and secure thanks to its high-quality construction and smart design. Equally smart and useful are the flexible application and connection options. With the GARDENA connection system, pipes with a diameter of 25 mm (1") or 38 mm (1 ½") can be connected without additional accessories. An additional G1 thread will allow the connection of extra pipes, such as the GARDENA Profi system. This makes the Dirty Water Submersible Pump 9000 the ideal companion for all homeowners and gardeners who have a pond, frequently work with construction trenches, or generally have problems with dirty water.

Technical Specifications:

  • Power 300 W
  • Maximum pumping capacity 9000 l/h
  • Maximum pressure 0.6 bar
  • Maximum submersion depth 7 m
  • Maximum delivery height 6 m
  • Maximum liquid temperature 35 °C
  • Cable length 10 m
  • Power cable type H05 RNF
  • Electrical protection class IP X8

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Horsepower
0.4 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
300 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6 m

Maximum Head Height: 6


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
6 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

84,00 €
4,00 € to a Skroutz Point