Power Tool Accessories

Plus 540W TD1 Power Tool Accessory Electric Winch Carrier with Handlebar Jigsaw

The Plus TD1 hoist trolley moves hoists to the right and left using its control unit. Its base fits an H-beam with a thickness of 68 to 110 mm and is compatible with all hoists.

  • Type: Hoist accessory...

The Plus TD1 hoist trolley moves hoists to the right and left using its control unit. Its base fits an H-beam with a thickness of 68 to 110 mm and is compatible with all hoists.

  • Type: Hoist accessory
  • Quantity: 1
  • Motor power: 540 W
  • Voltage: 220 V
  • Frequency: 50 Hz
  • Travel speed: 16.4 m/min
  • Load capacity: 1,000 kg
  • Weight: 15 kg
  • Control unit: Right-left movement...
See full description See full description

Top specs

See all
  • Item Lifting & Pulling Parts
108 00 €
Delivery Friday, 13 November
32,00 € shipping cost
Delivery Fri, 20 Nov - Tue, 24 Nov
31,00 € shipping cost
Do you want it with 5,00 € shipping discount?
Sent from Greece
From Istikoglou
Greece
See Tools Equipment on the page of Istikoglou
What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing

Reviews (3)

Reviews

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Constandine_D_
    1
    1 out of 3 members found this review helpful

    If you want to struggle, like I have been struggling for almost 5 months now, to make it work properly on a 10-inch beam, then go ahead and get it. First of all, there is an adjuster under the bearings that holds the whole system in place to roll smoothly on the beam. No matter how much you adjust and tighten it, it comes loose and the system goes wherever it wants, just like a belly flop. It also gets stuck on the beam and skids. If you tighten it enough, it skids, if you leave it a little loose, apart from going like the back of a belly flop, it skids again. All this creates another problem with the pulley, which is that the pulley leans forward due to the weight, and as it pulls the load, the wire rope wraps exclusively around the front part of the pulley, causing one wrap to ride on top of the other and occasionally slip, with the risk of being cut by the shaking it does. I hope this helps you because those who sell it, besides the fact that some may not actually know how it works, there are also others who act like they know everything

    Translated from Greek ·
    Did you find this review helpful?
  • If you want to struggle, like I have been struggling for almost 5 months now, to make it work properly on a 10-inch beam, then go ahead and get it. First of all, there is an adjuster under the bearings that holds the whole system in place to roll smoothly on the beam. No matter how much you adjust and tighten it, it comes loose and the system goes wherever it wants, just like a belly flop. It also gets stuck on the beam and skids. If you tighten it enough, it skids, if you leave it a little loose, apart from going like the back of a belly flop, it skids again. All this creates another problem with the pulley, which is that the pulley leans forward due to the weight, and as it pulls the load, the wire rope wraps exclusively around the front part of the pulley, causing one wrap to ride on top of the other and occasionally slip, with the risk of being cut by the shaking it does. I hope this helps you because those who sell it, besides the fact that some may not actually know how it works, there are also others who act like they know everything

    Translated from Greek ·
    1
  • 0
  • 0
  • See all
Questions

Description & Specifications

The Plus TD1 hoist trolley moves hoists to the right and left using its control unit. Its base fits an H-beam with a thickness of 68 to 110 mm and is compatible with all hoists.

  • Type: Hoist accessory
  • Quantity: 1
  • Motor power: 540 W
  • Voltage: 220 V
  • Frequency: 50 Hz
  • Travel speed: 16.4 m/min
  • Load capacity: 1,000 kg
  • Weight: 15 kg
  • Control unit: Right-left movement
  • Compatibility: All hoists
  • Fits H-beams: Thickness 68–110 mm

Manufacturer

Components Type
Lifting & Pulling Parts
Set
No
Pieces
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Constandine_D_
    1
    1 out of 3 members found this review helpful

    If you want to struggle, like I have been struggling for almost 5 months now, to make it work properly on a 10-inch beam, then go ahead and get it. First of all, there is an adjuster under the bearings that holds the whole system in place to roll smoothly on the beam. No matter how much you adjust and tighten it, it comes loose and the system goes wherever it wants, just like a belly flop. It also gets stuck on the beam and skids. If you tighten it enough, it skids, if you leave it a little loose, apart from going like the back of a belly flop, it skids again. All this creates another problem with the pulley, which is that the pulley leans forward due to the weight, and as it pulls the load, the wire rope wraps exclusively around the front part of the pulley, causing one wrap to ride on top of the other and occasionally slip, with the risk of being cut by the shaking it does. I hope this helps you because those who sell it, besides the fact that some may not actually know how it works, there are also others who act like they know everything

    Translated from Greek ·
    Did you find this review helpful?
  • If you want to struggle, like I have been struggling for almost 5 months now, to make it work properly on a 10-inch beam, then go ahead and get it. First of all, there is an adjuster under the bearings that holds the whole system in place to roll smoothly on the beam. No matter how much you adjust and tighten it, it comes loose and the system goes wherever it wants, just like a belly flop. It also gets stuck on the beam and skids. If you tighten it enough, it skids, if you leave it a little loose, apart from going like the back of a belly flop, it skids again. All this creates another problem with the pulley, which is that the pulley leans forward due to the weight, and as it pulls the load, the wire rope wraps exclusively around the front part of the pulley, causing one wrap to ride on top of the other and occasionally slip, with the risk of being cut by the shaking it does. I hope this helps you because those who sell it, besides the fact that some may not actually know how it works, there are also others who act like they know everything

    Translated from Greek ·
    1
  • 0
  • 0
  • See all
108,00 €
32,00 €