The sand filter can filter 10980 liters per hour and features a durable filtration tank that is protected from corrosion. It also has resistance to the acidic chlorinated pool water and incorporates a timer, with which you can select the desired operating time (2, 4, 6, 8, 10, 16, 24 hours). The timer has 2 functions: continuous operation and single cycle operation. For continuous operation, the pump will run for the preset hours and then stop operating. This schedule will repeat daily. For single cycle operation, the pump will run for the preset hours and then stop operating. The operating hours are easily adjusted by pressing the timer button.
The pump with a sand filter and timer is designed to help maintain the cleanliness of the pool, keeping it free from debris.
Details
The sand filter can filter 10980 liters per hour and features a durable filtration tank that is protected from corrosion. It also has resistance to the acidic chlorinated pool water and incorporates a timer, with which you can select the desired operating time (2, 4, 6, 8, 10, 16, 24 hours). The timer has 2 functions: continuous operation and single cycle operation. For continuous operation, the pump will run for the preset hours and then stop operating. This schedule will repeat daily. For single cycle operation, the pump will run for the preset hours and then stop operating. The operating hours are easily adjusted by pressing the timer button.
The additional pre-filter
Additionally, an extra pre-filter is included to keep dust away from the coarse sand filter. The top flange clamp design allows for 360-degree rotation for easy installation. Thanks to the reinforced plastic housing, this pool filter pump is weather-resistant and durable. For secure placement, the set includes a flexible base with mounting capability. The pump is compatible with most above-ground pools with a 38 mm port.
Note: It can be connected to pipes with a diameter of 32 mm as well as 38 mm.
Features
- Color: Blue and black
- Material: Plastic
- Dimensions: 550 x 480 x 740 mm (L x W x H)
- Power supply: 220-240 V~, 50 Hz
- Power: 530 W
- Connector diameter: 38 mm
- Filter diameter: 38 cm (15")
- Flow rate: 7.5 m³/hour (32.8 GPM)
- Maximum head: 11 m
- Maximum pump capacity: 10980 liters/hour
- Maximum operating pressure: 3.5 bar
- Suitable water temperature: 0-45°C
- With pre-filter
- Built-in timer with 2 functions: continuous and single cycle
- The timer can be set at intervals of 2 hours, 4 hours, 6 hours, 8 hours, 10 hours, 16 hours, and 24 hours
- Requires 19-36 kg of filter sand (not included)
- Protection rating: IPX5
7-way valve
- Filtering
- Rinsing
- Recirculation
- Winter
- Backwash
- Close
- Waste
Main Specifications
- Type
- Filter
- Power (hp)
- 0.7 hp
- Power (Watt)
- 530 W
- Power Source
- Single-Phase
- Motor Type
- Constant Speed
- Suitable for Saltwater
- No
- Pool Size
- Small (up to 50 m³)
- Filter Included
- No
Performance
- Maximum Supply
- 10980 lt/h
- Maximum Head of a Pump
- 11 m
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.