Skroutz.cy

Total Core Drill with Stand 2800W
Diamond Core Drills

Total Core Drill with Stand 2800W Code: TDDM28001

Diamond core drill 200mm by Total.

See full description
237 00 €
237 Coins 237 Coins
Delivery by Wed, 15 Jul
34,50 € shipping cost
Delivery Tue, 21 Jul - Thu, 23 Jul
29,00 € shipping cost
Do you want it with 29,50 € shipping?
Sent from Greece
From e-tserpelis 4.9 (50)
4.9 (50 reviews)
Greece
3 pieces
See Construction Tools & Machinery on the page of e-tserpelis
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

Characteristics

  • Drill base
  • 1 Set of spare carbon brushes
  • Overload safety switch

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
TDDM28001
Type
with Stand
Power
2800 W
Max Cup Diameter
200 mm
Maximum Speed
800 rpm
Wet Drilling
No
Weight
15 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (3)

Reviews

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • georgelykaki
    5
    9 out of 10 members found this review helpful
    georgelykaki

    Verified purchase

    I have used it for drilling a 122 hole. For the money, it's worth it, but it is not recommended for many and frequent uses.
    It drills through concrete easily, but the delay occurs when it encounters iron, as the speed decreases significantly.
    Drilling a 122 hole in reinforced concrete, along with the setup time of the drill, takes 30-35 minutes.
    While with another, more expensive one, the time was 13 minutes in the same concrete.

    Translated from Greek ·
    Did you find this review helpful?
  • plotiras
    5
    27 out of 27 members found this review helpful
    plotiras

    Verified purchase

    Very good product, very cheap and does a great job, but it needs modifications. The axis is f22 with m14 pitch and the glasses I found are all 1.1/4 hydraulic pass, so it needs compression and the drill is for short glasses, so I have to make modifications and raise the trunk, in total I paid an extra 80 euros. In my opinion, it's worth it for the job it does

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Haris_Poyl

    Verified purchase

    It doesn't heat up and drills quite well, especially for its price

    Translated from Greek ·
    Did you find this review helpful?
  • georgelykaki
    5
    georgelykaki

    I have used it for drilling a 122 hole. For the money, it's worth it, but it is not recommended for many and frequent uses.
    It drills through concrete easily, but the delay occurs when it encounters iron, as the speed decreases significantly.
    Drilling a 122 hole in reinforced concrete, along with the setup time of the drill, takes 30-35 minutes.
    While with another, more expensive one, the time was 13 minutes in the same concrete.

    Translated from Greek ·
    9
  • plotiras
    5
    plotiras

    Very good product, very cheap and does a great job, but it needs modifications. The axis is f22 with m14 pitch and the glasses I found are all 1.1/4 hydraulic pass, so it needs compression and the drill is for short glasses, so I have to make modifications and raise the trunk, in total I paid an extra 80 euros. In my opinion, it's worth it for the job it does

    Translated from Greek ·
    27
  • 5
    Haris_Poyl

    It doesn't heat up and drills quite well, especially for its price

    Translated from Greek ·
    0
  • See all
Questions (3)

Questions

38 users have this product and can help you

Ask for the product
fotisbin

Γεια σας, θα ήθελα να ρωτήσω τον plotiras που πήγε και έφτιαξε αυτή την βίδα στήριξης τις καροτιέρας που φαίνεται στις φωτογραφίες.

fotisbin 2024-07-26
0 Replies Reply to
See all questions (3)

Description & Specifications

Characteristics

  • Drill base
  • 1 Set of spare carbon brushes
  • Overload safety switch

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
TDDM28001
Type
with Stand
Power
2800 W
Max Cup Diameter
200 mm
Maximum Speed
800 rpm
Wet Drilling
No
Weight
15 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

5.0
3
5.0
Review this product
  1. 3
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Reviews by our members

  • georgelykaki
    5
    9 out of 10 members found this review helpful
    georgelykaki

    Verified purchase

    I have used it for drilling a 122 hole. For the money, it's worth it, but it is not recommended for many and frequent uses.
    It drills through concrete easily, but the delay occurs when it encounters iron, as the speed decreases significantly.
    Drilling a 122 hole in reinforced concrete, along with the setup time of the drill, takes 30-35 minutes.
    While with another, more expensive one, the time was 13 minutes in the same concrete.

    Translated from Greek ·
    Did you find this review helpful?
  • plotiras
    5
    27 out of 27 members found this review helpful
    plotiras

    Verified purchase

    Very good product, very cheap and does a great job, but it needs modifications. The axis is f22 with m14 pitch and the glasses I found are all 1.1/4 hydraulic pass, so it needs compression and the drill is for short glasses, so I have to make modifications and raise the trunk, in total I paid an extra 80 euros. In my opinion, it's worth it for the job it does

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    Haris_Poyl

    Verified purchase

    It doesn't heat up and drills quite well, especially for its price

    Translated from Greek ·
    Did you find this review helpful?
  • georgelykaki
    5
    georgelykaki

    I have used it for drilling a 122 hole. For the money, it's worth it, but it is not recommended for many and frequent uses.
    It drills through concrete easily, but the delay occurs when it encounters iron, as the speed decreases significantly.
    Drilling a 122 hole in reinforced concrete, along with the setup time of the drill, takes 30-35 minutes.
    While with another, more expensive one, the time was 13 minutes in the same concrete.

    Translated from Greek ·
    9
  • plotiras
    5
    plotiras

    Very good product, very cheap and does a great job, but it needs modifications. The axis is f22 with m14 pitch and the glasses I found are all 1.1/4 hydraulic pass, so it needs compression and the drill is for short glasses, so I have to make modifications and raise the trunk, in total I paid an extra 80 euros. In my opinion, it's worth it for the job it does

    Translated from Greek ·
    27
  • 5
    Haris_Poyl

    It doesn't heat up and drills quite well, especially for its price

    Translated from Greek ·
    0
  • See all
237,00 €
34,50 € 39,50 €   shipping cost