It is suitable for individual use (application only on one supply) in the bathroom, it can be easily and quickly installed. It offers convenience in use or maintenance and serves your daily needs for hot water.

It is provided with a special mixer tap for the sink with cold/hot water.

• Pressure switch to activate only when there is water flow
• Double thermal safety for protection against overheating
• Resistance rods for easy replacement, at low cost
• Internal flow/temperature regulator

The instant water heater is a type of water heater that heats water in real time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the resistance and other components.

It operates with electricity and is single-phase.

The instant water heater has a cold water inlet pipe, which passes through the heating element, heats up, and comes out in the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the cold water inlet should not be too low.

The temperature of the water is regulated by a thermostat, so that it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that someone can use the hot water directly, without the need for mixing with cold water.

The maximum temperature that can be reached for hot water production is 20 °C, while the maximum flow rate of water reaches up to 2 liters per minute.

• It is small in size and does not take up much space.
• There is no energy loss, as only the water that is being used is heated at that moment. Therefore, there is savings on the electricity bill. In a traditional water heater, the unused hot water goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold water, as in a traditional water heater. This results in water savings, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we open the tap, hot water starts running in a few seconds. A traditional water heater takes some minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.