The Hager L502PV 2-pole fuse-switch disconnector is designed for photovoltaic systems and operates with direct current (DC). It uses gPV fuses with rated currents from 2 A to 32 A.
- Poles: 2
- Frequency: 50 Hz
- Rated operational voltage Ue (AC): 690/1000 V
- Rated insulation voltage Ui: 690 V
- Rated operating voltage Un (DC): 1000 V
- Rated fuse currents: 2, 4, 6, 8, 10, 12, 16, 20, 25 and 32 A
- Fuse characteristic: gPV
- Total power loss at rated current: 2.2 W
- Electrical endurance: 2000 cycles
- Mechanical endurance: 5000 cycles
- Depth: 75 mm
- Height: 77 mm
- Width: 35 mm
- Tightening torque: 2 Nm
- Rigid conductor cross-section: 16 mm²
- Flexible conductor cross-section: 10 mm²
- Standard: WEEE
- Degree of protection: IP20
- Pollution degree: 3 according to IEC 60664 / IEC 60947-2
- Storage temperature: from -25 °C to 80 °C
- Calibration temperature: 30 °C
- Current correction factor for 1–3 phases: 0.9
- Current correction factor for 4–6 phases: 0.9
- Current correction factor for 7–9 phases: 0.85
- Current correction factor for more than 10 phases: 0.7
- Current correction factor for temperatures above 20 °C: 1
- Current correction factor for temperatures above 30 °C: 0.95
- Current correction factor for temperatures above 40 °C: 0.9
- Current correction factor for temperatures above 50 °C: 0.8
- Type
- Disconnect Switch
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.