Skroutz.cy

Elmark Automatic Circuit Breaker 80A Single-pole AC 41180D
Automatic Circuit Breaker

Elmark Automatic Circuit Breaker 80A Single-pole AC 41180D

MINI AUTOMATIC CIRCUIT BREAKER C100M 10KA 1P 80A TYPE D

  • Rated operating voltage: 230/400V; 50/60Hz
  • Insulation voltage: 2000 V
  • Rated current: 80-125A
  • Breaking capacity: 10,000 A
  • Poles: 1; 2; 3; 4
  • ...

MINI AUTOMATIC CIRCUIT BREAKER C100M 10KA 1P 80A TYPE D

  • Rated operating voltage: 230/400V; 50/60Hz
  • Insulation voltage: 2000 V
  • Rated current: 80-125A
  • Breaking capacity: 10,000 A
  • Poles: 1; 2; 3; 4
  • Release curve: C; D
  • The maximum release current interrupts between 5 and 10 In; used for the protection of supply cables and compatible consumers
  • The maximum...
See full description See full description
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

MINI AUTOMATIC CIRCUIT BREAKER C100M 10KA 1P 80A TYPE D

  • Rated operating voltage: 230/400V; 50/60Hz
  • Insulation voltage: ≥2000 V
  • Rated current: 80-125A
  • Breaking capacity: 10,000 A
  • Poles: 1; 2; 3; 4
  • Release curve: C; D
  • The maximum release current interrupts between 5 and 10 In; used for the protection of supply cables and compatible consumers
  • The maximum release current interrupts between 10 and 14 In; used for the protection of consumers with high starting current (electric motors, transformers)
  • Resistance to electrical wear (number of cycles): ≥4000
  • Resistance to mechanical wear (number of cycles): ≥20000
  • Limit category: 3
  • IP code: IP>20
  • Ambient temperature: -5 to +65°C±2°C
  • Installation: Vertically on DIN rail
  • Standards: EN60898-1; EN60947-2

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
1
Rated Current
80 A
Operating Curve
Curve D

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve D

It is used for heavy loads with high starting peaks, such as large motors and transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

2 users have this product and can help you

Ask for the product

Description & Specifications

MINI AUTOMATIC CIRCUIT BREAKER C100M 10KA 1P 80A TYPE D

  • Rated operating voltage: 230/400V; 50/60Hz
  • Insulation voltage: ≥2000 V
  • Rated current: 80-125A
  • Breaking capacity: 10,000 A
  • Poles: 1; 2; 3; 4
  • Release curve: C; D
  • The maximum release current interrupts between 5 and 10 In; used for the protection of supply cables and compatible consumers
  • The maximum release current interrupts between 10 and 14 In; used for the protection of consumers with high starting current (electric motors, transformers)
  • Resistance to electrical wear (number of cycles): ≥4000
  • Resistance to mechanical wear (number of cycles): ≥20000
  • Limit category: 3
  • IP code: IP>20
  • Ambient temperature: -5 to +65°C±2°C
  • Installation: Vertically on DIN rail
  • Standards: EN60898-1; EN60947-2

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
1
Rated Current
80 A
Operating Curve
Curve D

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve D

It is used for heavy loads with high starting peaks, such as large motors and transformers.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

12,10 €
5,00 €   shipping cost