Skroutz.cy

vidaXL Pool Pump Filter Three-Phase with Horsepower 1.35hp and Maximum Water Flow 16800 liters/hour
Pool Water Pumps

vidaXL Pool Pump Filter Three-Phase with Horsepower 1.35hp and Maximum Water Flow 16800 liters/hour

Key features:

  • Maximum Flow Rate: 16800 liters/hour
  • Power Supply: 220-240 V~, 50 Hz
  • Maximum Head: 10 m
  • Maximum Operating Pressure: 3.5 bar
  • Dimensions: 752 x 510 x 865 mm
See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Standard Domestic (50 to 90 m³)

  • Power Supply

    Three-Phase

    Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • See all
368 48 €
369 Coins 369 Coins
Delivery Thu, 06 Aug - Wed, 12 Aug
6,00 € shipping cost
Delivery Fri, 14 Aug - Thu, 20 Aug
Free shipping cost
Do you want it with 1,00 € shipping?
Sent from Greece
From Donadeco 4.4 (5)
4.4 (5 reviews)
Greece
20+ pieces
See Swimming Pool Equipment on the page of Donadeco
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The sand filter pump is designed to help maintain the cleanliness of the pool and be free from debris.

The sand filter

The sand filter can filter 16800 liters per hour and features a corrosion-resistant filter tank with resistance to chlorinated pool water. It is also equipped with a strainer for separating leaves and other hard debris. Additionally, it has an additional pre-filter to keep dust away from the coarse sand filter. It has a multi-valve for easy operation and a convenient pressure gauge. The design of the top clamp flange allows for 360-degree rotation for easy installation. For secure placement, the set includes a base with fastening capability.

Reinforced Plastic Casing

Thanks to its reinforced plastic casing, this pool water pump is weather-resistant. It is compatible with most above-ground pools with a 3.8 cm connection.

Note: It can be connected to pipes with a diameter of 32 mm or 38 mm.

Benefits

  • Dimensions: 752 x 510 x 865 mm (L x W x H)
  • Power supply: 220-240 V~, 50 Hz
  • Power: 1000 W
  • Connection diameter: 3.8 cm
  • Filter diameter: 46 cm (18")
  • Maximum head: 10 m
  • Maximum pump flow rate: 16800 liters/hour
  • Maximum operating pressure: 3.5 bar
  • Suitable water temperature: 0-45°C
  • Flow rate: 44 GPM / 10 m³/hour
  • With pre-filter
  • Requires 50 kg of sand for filters (not included)
  • Protection rating: IPX5
  • Product suitable for pipes with a diameter of 32 mm and 38 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
1.35 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
1000 W
Power Source
Three-Phase

Power Source

Three-Phase

Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
16800 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
10 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Cable Length
0.038 m
Connection Nozzle
38 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The sand filter pump is designed to help maintain the cleanliness of the pool and be free from debris.

The sand filter

The sand filter can filter 16800 liters per hour and features a corrosion-resistant filter tank with resistance to chlorinated pool water. It is also equipped with a strainer for separating leaves and other hard debris. Additionally, it has an additional pre-filter to keep dust away from the coarse sand filter. It has a multi-valve for easy operation and a convenient pressure gauge. The design of the top clamp flange allows for 360-degree rotation for easy installation. For secure placement, the set includes a base with fastening capability.

Reinforced Plastic Casing

Thanks to its reinforced plastic casing, this pool water pump is weather-resistant. It is compatible with most above-ground pools with a 3.8 cm connection.

Note: It can be connected to pipes with a diameter of 32 mm or 38 mm.

Benefits

  • Dimensions: 752 x 510 x 865 mm (L x W x H)
  • Power supply: 220-240 V~, 50 Hz
  • Power: 1000 W
  • Connection diameter: 3.8 cm
  • Filter diameter: 46 cm (18")
  • Maximum head: 10 m
  • Maximum pump flow rate: 16800 liters/hour
  • Maximum operating pressure: 3.5 bar
  • Suitable water temperature: 0-45°C
  • Flow rate: 44 GPM / 10 m³/hour
  • With pre-filter
  • Requires 50 kg of sand for filters (not included)
  • Protection rating: IPX5
  • Product suitable for pipes with a diameter of 32 mm and 38 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
1.35 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
1000 W
Power Source
Three-Phase

Power Source

Three-Phase

Operates with three-phase power (400V) and is intended for large pools or professional installations. It is more powerful, efficient for continuous use, and durable, but requires a three-phase supply which is not usually available in homes.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Standard Domestic (50 to 90 m³)
Filter Included
No

Performance

Maximum Supply
16800 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
10 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Cable Length
0.038 m
Connection Nozzle
38 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

368,48 €
6,00 €   shipping cost 11,00 €