Skroutz.cy

Isomat Stuccocret General-Purpose Acrylic / Resinous White Putty 4kg
Putty Fillers

Isomat Stuccocret General-Purpose Acrylic / Resinous White Putty 4kg Code: 032600041

Extremely fine-grained, resinous, cementitious putty for interior use.

See Description & Specifications

Learn more about invoicing

Reviews (9)

Reviews

5.0
9
5.0
Review this product
  1. 9
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Questions
Product report

Description & Specifications

Isomat Stuccocret is a fine-grained acrylic resin-based filler for smoothing and levelling interior plaster, concrete and plasterboard surfaces. When mixed with water, it forms a paste with good workability that spreads easily without clumping. The smooth surface it creates can be sanded and is ready for painting or another finish.

On plaster and concrete surfaces, it can be applied without primer or oil-based preparation. Plasterboard must first be primed with FLEX-PRIMER acrylic primer. Apply with a putty knife in two coats, with a maximum thickness of 1 mm per coat. Apply the second coat once the first has set, after 2–3 hours. Sanding and painting can be carried out after approximately 12 hours. It is a replacement for oil-based fillers and similar products.

  • Type: General-purpose
  • Form: Powder
  • Colour: White
  • Weight: 4 kg
  • Properties: Acrylic, resin-based
  • Suitable surfaces: Plaster, concrete, plasterboard
  • Mixing: With water
  • Application: Applied with a putty knife in two coats
  • Maximum thickness per coat: 1 mm
  • Waiting time between coats: 2–3 hours
  • Time before sanding and painting: Approximately 12 hours
  • Coverage: Approximately 1.1 kg/m² per mm of coat thickness
  • Standard: GP CS II, W0 according to EN 998-1
  • Environmental declaration: EPD, registration no. EPD-IES-0006173

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
032600041

Dimensions

Type
General-Purpose
Attributes
Acrylic, Resinous
Colour
White
Type
Powder

Type

Refers to the physical state of the material. Powder fillers require mixing with water before use (ideal for large surfaces), while forms such as paste, spray, or stick are ready to use (ideal for quick repairs).
Application Surface
Wall / Plaster, Plasterboard
Sanding Capability
Yes
No Shrinkage / Crack Resistance
No

Quantity

Weight
4 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (9)

5.0
9
5.0
Review this product
  1. 9
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
3,50 €
4,50 €   shipping cost