Skroutz.cy

Kraft & Dele Submersible Clean Rainwater Single-phase Pump Waste Water / Sewage 2.17hp KD759
Submersible Water Pumps

Kraft & Dele Submersible Clean Rainwater Single-phase Pump Waste Water / Sewage 2.17hp KD759

The submersible pump from Kraft&Dele is suitable for pumping clean and rainwater. It can be used in households and farms for the drainage of sewage and septic tanks. It features a cast iron body and a...

The submersible pump from Kraft&Dele is suitable for pumping clean and rainwater. It can be used in households and farms for the drainage of sewage and septic tanks. It features a cast iron body and a powerful output of 1600 W with a lifting height of up to 18 m.

  • Flow rate: 12500 l / h
  • Cast iron body
  • Induction motor
  • Maximum immersion depth: 6 m
  • Fully...
See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    18

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

The submersible pump from Kraft&Dele is suitable for pumping clean and rainwater. It can be used in households and farms for the drainage of sewage and septic tanks. It features a cast iron body and a powerful output of 1600 W with a lifting height of up to 18 m.

  • Flow rate: 12500 l / h
  • Cast iron body
  • Induction motor
  • Maximum immersion depth: 6 m
  • Fully submersible
  • Speed: 3000 rpm
  • Lifting height: 18 m
  • Maximum water temperature: 40° C
  • Outlet diameter: 1" (25 mm)
  • Power cord length: 7 m
  • Voltage: 230V / 50Hz
  • Power: 1600 W
  • Weight: 9 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.17 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1627.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
18 m

Maximum Head Height: 18


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Kostas_Karakevas
    5
    Kostas_Karakevas

    Verified purchase

    Very powerful, I have installed it in an 8.5 meter well and I am very satisfied with its performance, for its price it is amazing.

    Translated from Greek ·
    Did you find this review helpful?
  • Kostas_Karakevas
    5
    Kostas_Karakevas

    Very powerful, I have installed it in an 8.5 meter well and I am very satisfied with its performance, for its price it is amazing.

    Translated from Greek ·
    0
  • See all
Questions

Questions

Do you have a question about the product?

10 users have this product and can help you

Ask for the product

Description & Specifications

The submersible pump from Kraft&Dele is suitable for pumping clean and rainwater. It can be used in households and farms for the drainage of sewage and septic tanks. It features a cast iron body and a powerful output of 1600 W with a lifting height of up to 18 m.

  • Flow rate: 12500 l / h
  • Cast iron body
  • Induction motor
  • Maximum immersion depth: 6 m
  • Fully submersible
  • Speed: 3000 rpm
  • Lifting height: 18 m
  • Maximum water temperature: 40° C
  • Outlet diameter: 1" (25 mm)
  • Power cord length: 7 m
  • Voltage: 230V / 50Hz
  • Power: 1600 W
  • Weight: 9 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.17 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1627.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
18 m

Maximum Head Height: 18


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Kostas_Karakevas
    5
    Kostas_Karakevas

    Verified purchase

    Very powerful, I have installed it in an 8.5 meter well and I am very satisfied with its performance, for its price it is amazing.

    Translated from Greek ·
    Did you find this review helpful?
  • Kostas_Karakevas
    5
    Kostas_Karakevas

    Very powerful, I have installed it in an 8.5 meter well and I am very satisfied with its performance, for its price it is amazing.

    Translated from Greek ·
    0
  • See all