Skroutz.cy

Kraft & Dele Electric Submersible Pump for Rainwater & Clean Water with Cutter 2850W Single-phase Water Pump 3.8hp KD755
Submersible Water Pumps

Kraft & Dele Electric Submersible Pump for Rainwater & Clean Water with Cutter 2850W Single-phase Water Pump 3.8hp KD755

Key features:

  • Powerful cutter system
  • Motor thermal protection
  • Capacity 21,000 L/h
  • Lifting height 23m

The cutting system allows the breakdown of solid bodies in wastewater, ensuring smooth operation.

See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    23

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
79 90 €
80 Coins 80 Coins
Delivery Thu, 27 Aug - Mon, 31 Aug
31,00 € shipping cost
Do you want it with 26,00 € shipping?
Sent from Greece
From E-Dructer 4.9 (45)
4.9 (45 reviews)
Greece
2 pieces
See Water Pumps on the page of E-Dructer
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Product report

Description

Description

At a glance

  • High Power 2850W: Professional performance for fast septic tank drainage.
  • Heavy Duty Grinder: Special cutting mechanism for processing solid waste residues.
  • Thermal Cut-out: Automatic overheating protection system for maximum safety.
  • Robust Construction: Designed to withstand heavy use with a weight of 14.5kg.

Professional Performance and Cutting

The submersible pump Kraft&Dele KD755 is the ideal solution for those seeking a reliable tool for pumping dirty water. With an impressive flow rate of 21,000 liters per hour, you can complete any drainage task in minimal time. The cutter system chops solid objects, allowing the pump to operate continuously even in very polluted environments.

Security

The device is equipped with a thermal protection switch, which prevents the motor from overheating, ensuring longevity and safe operation. The 2-inch outlet diameter allows the connection of high-flow pipes, while the lifting height of 23 meters offers you the flexibility you need in deep tanks. It is a tool designed to withstand the most demanding conditions, keeping maintenance costs at low levels.

Specifications

  • Power Supply Voltage: 230V / 5.2A
  • Power: 2850W
  • Pump Capacity: 21,000 L/h
  • Liquid Lifting Height: 23m
  • Rotation Speed: 3000 rpm
  • Pipe Diameter: 2'' (52mm)
  • Weight: 14.5kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
3.8 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2850 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
3000 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
23 m

Maximum Head Height: 23


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
21 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Giannikopoulos_Panagiotis
    4
    Giannikopoulos_Panagiotis

    Verified purchase

    It doesn't have a float, that's why I gave it 4 stars; otherwise, it hasn't needed to work yet for me to say anything. I will come back when it is used in the rain

    Translated from Greek ·
    Did you find this review helpful?
  • Giannikopoulos_Panagiotis
    4
    Giannikopoulos_Panagiotis

    It doesn't have a float, that's why I gave it 4 stars; otherwise, it hasn't needed to work yet for me to say anything. I will come back when it is used in the rain

    Translated from Greek ·
    0
  • See all
Questions (1)

Questions

23 users have this product and can help you

Ask for the product
Anast_Tato

έχει εξωτερικό ή εσωτερικό φλοτερ ή δεν έχει φλοτερ και είναι on off από την πριζα/διακόπτη ;

Anast_Tato 2025-01-01
1 Reply Reply to
See all questions (1)

Description & Specifications

At a glance

  • High Power 2850W: Professional performance for fast septic tank drainage.
  • Heavy Duty Grinder: Special cutting mechanism for processing solid waste residues.
  • Thermal Cut-out: Automatic overheating protection system for maximum safety.
  • Robust Construction: Designed to withstand heavy use with a weight of 14.5kg.

Professional Performance and Cutting

The submersible pump Kraft&Dele KD755 is the ideal solution for those seeking a reliable tool for pumping dirty water. With an impressive flow rate of 21,000 liters per hour, you can complete any drainage task in minimal time. The cutter system chops solid objects, allowing the pump to operate continuously even in very polluted environments.

Security

The device is equipped with a thermal protection switch, which prevents the motor from overheating, ensuring longevity and safe operation. The 2-inch outlet diameter allows the connection of high-flow pipes, while the lifting height of 23 meters offers you the flexibility you need in deep tanks. It is a tool designed to withstand the most demanding conditions, keeping maintenance costs at low levels.

Specifications

  • Power Supply Voltage: 230V / 5.2A
  • Power: 2850W
  • Pump Capacity: 21,000 L/h
  • Liquid Lifting Height: 23m
  • Rotation Speed: 3000 rpm
  • Pipe Diameter: 2'' (52mm)
  • Weight: 14.5kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
3.8 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2850 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
3000 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
Yes

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
23 m

Maximum Head Height: 23


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
21 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Giannikopoulos_Panagiotis
    4
    Giannikopoulos_Panagiotis

    Verified purchase

    It doesn't have a float, that's why I gave it 4 stars; otherwise, it hasn't needed to work yet for me to say anything. I will come back when it is used in the rain

    Translated from Greek ·
    Did you find this review helpful?
  • Giannikopoulos_Panagiotis
    4
    Giannikopoulos_Panagiotis

    It doesn't have a float, that's why I gave it 4 stars; otherwise, it hasn't needed to work yet for me to say anything. I will come back when it is used in the rain

    Translated from Greek ·
    0
  • See all
79,90 €
31,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more