DM - 8CHL: Central unit (controller) with 8 channels

• OPERATING VOLTAGE: 180 - 230V AC
• NETWORK FREQUENCY: 50Hz
• POWER CONSUMPTION: 10mA
• AMBIENT TEMPERATURE: -20°C to +50°C
• TERMINAL WIRES: From Ø 0.5mm to Ø 3.5mm
• FIXING: Clip on rail 35x7.5mm (DIN 45277)
• CONTROL CAPACITY OF FINAL POWER UNITS: Up to 24 pcs in total with distribution up to 4 pcs per channel.
• COMMUNICATION WITH DM-LCD: Via 2-wire telephone cable with RJ-11 standard plugs.

EXPLANATION OF THE NUMBERS IN THE SECOND PHOTO:

• 1 button [channel] for selecting the channel [1-8] to be adjusted.
• 2 buttons (up, down) for increasing or decreasing the power in the selected channel (from 0% to 99%).
• 3 memo buttons (M1, M2, M3) for creating and selecting three different scenarios.
• 1 display screen (channel) for channel indication.
• 1 display screen (power) for power indication per channel (0% to 99%).
• 2 power supply terminals N (neutral), L (phase).
• 8 terminals (1Ch, 2Ch, to 8Ch) for communication with final power units.
• 1 input for connection with the remote control unit.

The MULTIDIMMER 8 Channel can control up to 8 different lighting or ventilation sections according to the space requirements (e.g. ceiling lights, corridor lights, wall lights, garden, pool, ventilation, etc.). For each section, up to 4 final units of 1 kW per channel can be connected. The number of final power units must not exceed 24 pieces in total. Therefore, we can control a total of 24 kW max.

For the smooth distribution of electrical loads per phase, the final power units offer the possibility of supplying from three different phases (R.S.T.).

The central control unit DM-8CHL and the final power units DM-CHL must be placed on the same panel. No special cable is required for electrical connection and communication.