Skroutz.cy

Legrand Automatic Circuit Breaker 20A Triple-pole AC 403546
Automatic Circuit Breaker

Legrand Automatic Circuit Breaker 20A Triple-pole AC 403546

General features of TX3 automatic circuit breakers 6 kA:

  • Thermomagnetic protection from 6 to 63 A, curve B & C.
  • Ability to bridge with a single or double fork comb.
  • Breaking capacity: 6000 - IEC...

General features of TX3 automatic circuit breakers 6 kA:

  • Thermomagnetic protection from 6 to 63 A, curve B & C.
  • Ability to bridge with a single or double fork comb.
  • Breaking capacity: 6000 - IEC 60898-1 - 230/400 V.
  • 6kA - IEC 60947-2 - 230/400 V.
  • Can be equipped with TX3 / DX3 accessories, such as auxiliary contacts, disconnecting coils, and remote control...
See full description See full description
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

General features of TX3 automatic circuit breakers 6 kA:

  • Thermomagnetic protection from 6 to 63 A, curve B & C.
  • Ability to bridge with a single or double fork comb.
  • Breaking capacity: 6000 - IEC 60898-1 - 230/400 V.
  • 6kA - IEC 60947-2 - 230/400 V.
  • Can be equipped with TX3 / DX3 accessories, such as auxiliary contacts, disconnecting coils, and remote control motors.
  • Does not accept residual current protection blocks.

Product Features:

  • Three-pole 400 V.
  • Curve: C.
  • Nominal current: 20 A.
  • Size: 3 elements of 17.5 mm.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
3
Rated Current
20 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

4 users have this product and can help you

Ask for the product

Description & Specifications

General features of TX3 automatic circuit breakers 6 kA:

  • Thermomagnetic protection from 6 to 63 A, curve B & C.
  • Ability to bridge with a single or double fork comb.
  • Breaking capacity: 6000 - IEC 60898-1 - 230/400 V.
  • 6kA - IEC 60947-2 - 230/400 V.
  • Can be equipped with TX3 / DX3 accessories, such as auxiliary contacts, disconnecting coils, and remote control motors.
  • Does not accept residual current protection blocks.

Product Features:

  • Three-pole 400 V.
  • Curve: C.
  • Nominal current: 20 A.
  • Size: 3 elements of 17.5 mm.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
3
Rated Current
20 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

13,76 €
5,00 €   shipping cost