You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more
What if I change my mind?
No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.
The TL-SG105PE is fully compatible with PoE devices, such as IP cameras, access points, and IP phones. It also works with non-PoE wired devices, such as computers, printers, and IPTV.
Self-Healing System with PoE Auto Recovery
The switch automatically detects and restarts PD devices, such as cameras and APs, when they go offline or become unresponsive, ensuring the stable operation of PoE-connected devices without the need for manual monitoring and restarting.
Smart power management to prevent power overload
Automatically reduces the power of lower-priority ports to ensure the power supply of high-priority ports when the total PoE power consumption exceeds 65 W. This protects the device from power overload operation.
Great compatibility with PD detection
Automatically detects the required PoE power for your device and protects your non-PoE equipment from damage.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Excellent Switch with 4 POE ports and one regular port (to connect 4 POE devices and 1 other port to another Switch).
I use it with 4 Raspberry Pi with POE+ hats. So far, no issues at all. The Raspberry Pis sit on top of the switch, which heats it up quite a bit. Therefore, even with additional heat, no problems have been observed.
This specific switch supports 802.3af / 802.3at -> meaning POE (15.4W) / POE+ (25.5W), so you can also use devices that require the higher wattage of POE+
Εξαιρετικό Switch με 4 θύρες POE και μία απλή (ώστε να συνδέσεις 4 POE συσκευές, και 1 άλλη θύρα σε κάποιο άλλο Switch).
Το χρησιμοποιώ σε 4 Raspberry Pi με POE+ hats. Μέχρι στιγμής κανένα απολύτως πρόβλημα. Τα Raspberry κάθονται και επάνω στο switch όπου και το ζεσταίνουν αρκετά. Οπότε και με επιπλέον θερμοκρασία, δεν έχει παρατηρηθεί κανένα πρόβλημα.
Το συγκεκριμένο υποστηρίζει 802.3af / 802.3at -> δηλαδή POE(15.4W) / POE+(25.5W), οπότε μπορείτε να παίξετε και με συσκευές που χρειάζονται τα παραπάνω Watt του POE+
Excellent Switch with 4 POE ports and one regular port (to connect 4 POE devices and 1 other port to another Switch).
I use it with 4 Raspberry Pi with POE+ hats. So far, no issues at all. The Raspberry Pis sit on top of the switch, which heats it up quite a bit. Therefore, even with additional heat, no problems have been observed.
This specific switch supports 802.3af / 802.3at -> meaning POE (15.4W) / POE+ (25.5W), so you can also use devices that require the higher wattage of POE+
Εξαιρετικό Switch με 4 θύρες POE και μία απλή (ώστε να συνδέσεις 4 POE συσκευές, και 1 άλλη θύρα σε κάποιο άλλο Switch).
Το χρησιμοποιώ σε 4 Raspberry Pi με POE+ hats. Μέχρι στιγμής κανένα απολύτως πρόβλημα. Τα Raspberry κάθονται και επάνω στο switch όπου και το ζεσταίνουν αρκετά. Οπότε και με επιπλέον θερμοκρασία, δεν έχει παρατηρηθεί κανένα πρόβλημα.
Το συγκεκριμένο υποστηρίζει 802.3af / 802.3at -> δηλαδή POE(15.4W) / POE+(25.5W), οπότε μπορείτε να παίξετε και με συσκευές που χρειάζονται τα παραπάνω Watt του POE+
Ακόμη και εάν δεν χρειαζόμαστε τη managed λειτουργία του (δεν θελω να μπλεξω με ρυθμίσεις) , πάλι plug n play δεν θεωρείται; Για οικιακό δίκτυο με 2 κάμερες και 2 access points ? Ευχαριστώ
The TL-SG105PE is fully compatible with PoE devices, such as IP cameras, access points, and IP phones. It also works with non-PoE wired devices, such as computers, printers, and IPTV.
Self-Healing System with PoE Auto Recovery
The switch automatically detects and restarts PD devices, such as cameras and APs, when they go offline or become unresponsive, ensuring the stable operation of PoE-connected devices without the need for manual monitoring and restarting.
Smart power management to prevent power overload
Automatically reduces the power of lower-priority ports to ensure the power supply of high-priority ports when the total PoE power consumption exceeds 65 W. This protects the device from power overload operation.
Great compatibility with PD detection
Automatically detects the required PoE power for your device and protects your non-PoE equipment from damage.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Excellent Switch with 4 POE ports and one regular port (to connect 4 POE devices and 1 other port to another Switch).
I use it with 4 Raspberry Pi with POE+ hats. So far, no issues at all. The Raspberry Pis sit on top of the switch, which heats it up quite a bit. Therefore, even with additional heat, no problems have been observed.
This specific switch supports 802.3af / 802.3at -> meaning POE (15.4W) / POE+ (25.5W), so you can also use devices that require the higher wattage of POE+
Εξαιρετικό Switch με 4 θύρες POE και μία απλή (ώστε να συνδέσεις 4 POE συσκευές, και 1 άλλη θύρα σε κάποιο άλλο Switch).
Το χρησιμοποιώ σε 4 Raspberry Pi με POE+ hats. Μέχρι στιγμής κανένα απολύτως πρόβλημα. Τα Raspberry κάθονται και επάνω στο switch όπου και το ζεσταίνουν αρκετά. Οπότε και με επιπλέον θερμοκρασία, δεν έχει παρατηρηθεί κανένα πρόβλημα.
Το συγκεκριμένο υποστηρίζει 802.3af / 802.3at -> δηλαδή POE(15.4W) / POE+(25.5W), οπότε μπορείτε να παίξετε και με συσκευές που χρειάζονται τα παραπάνω Watt του POE+
Excellent Switch with 4 POE ports and one regular port (to connect 4 POE devices and 1 other port to another Switch).
I use it with 4 Raspberry Pi with POE+ hats. So far, no issues at all. The Raspberry Pis sit on top of the switch, which heats it up quite a bit. Therefore, even with additional heat, no problems have been observed.
This specific switch supports 802.3af / 802.3at -> meaning POE (15.4W) / POE+ (25.5W), so you can also use devices that require the higher wattage of POE+
Εξαιρετικό Switch με 4 θύρες POE και μία απλή (ώστε να συνδέσεις 4 POE συσκευές, και 1 άλλη θύρα σε κάποιο άλλο Switch).
Το χρησιμοποιώ σε 4 Raspberry Pi με POE+ hats. Μέχρι στιγμής κανένα απολύτως πρόβλημα. Τα Raspberry κάθονται και επάνω στο switch όπου και το ζεσταίνουν αρκετά. Οπότε και με επιπλέον θερμοκρασία, δεν έχει παρατηρηθεί κανένα πρόβλημα.
Το συγκεκριμένο υποστηρίζει 802.3af / 802.3at -> δηλαδή POE(15.4W) / POE+(25.5W), οπότε μπορείτε να παίξετε και με συσκευές που χρειάζονται τα παραπάνω Watt του POE+
Be the first to leave a comment!