I installed the stand with a 3060 ti and it didn't recognize the card, and whenever it did recognize it, the PC would freeze, and when I removed the stand everything worked just fine

Ekane tin doulia sthn arxh kai meta gia kapoio logo stamathse na mou emfanizei thn gpu sto device manager kai den etrexe ta grafika ka8olou mexri na to pta3w

Very good and solid product

Convenient base for vertically installing the graphics card in the case. Good quality cable included. However, if your case is not free in the PCI slots, meaning if there are brackets between the slots, you may need to cut some in order to pass the cables through to the card. With the new cards of the Rtx 4070 series and above, it becomes quite difficult due to their weight. In general, it is a good and reliable solution.

I consider it a satisfactory purchase for the 30€ I bought it for. It is of good quality, although as it is obvious, its installation is a bit intimidating. One of its many positives is that it minimizes "gpu sag" for those who have a heavy graphics card, and as a bonus, the cards look amazing aesthetically. The extended version is of exceptional quality, with a flexible metal frame to shape and fit it as needed inside the case. Pay close attention to the CPU cooler, as the graphics card may find it bulky. However, I admit that in my case, it fit without any issues (although it has less than 2 centimeters of clearance), even though I have an Arctic Freezer 50.

It is not a necessary mod, but it is a nice addition for someone who already has a circus-computer!

The base holds the graphics card very well in a nice position, but the issue is that the holes in the base don't align with my case because it is lower, resulting in me needing to make additional holes and it feels a bit unstable. However, the temperatures are fine, as if they have slightly decreased on the card. I have it on an MSI B450 Tomahawk Max motherboard and RTX 3050

I have the be quiet 500dx with a dark rock pro 4, it doesn't fit.... now I will probably only use the cable for the connection and I will come up with a solution to secure the card with strings from here and there inside the case, if I don't like it, it will go back in as it was before.
Update: the 3070ti is not working, it works but it freezes completely. I took it out and I have it aside, it's brand new.

It is not compatible with the 306012gb, the PC freezes without any warning.. as soon as I removed it, everything worked fine.
With the 2060, it works perfectly fine... figure it out

Very good and high-quality! My graphics card is the Asus 3070 Noctua edition, one of the largest cards if not the largest ever, and yet there were no issues! Also, it definitely makes a difference in temperatures, much better cooling!

It is qualitative and the PCIe cable also comes in a packaging that doesn't say much, just a typical box with some instructions. It also doesn't fit all the way back due to the displayport finding on the case brackets (I slightly modified it with a drimmel and it fit all the way back). Only time will tell!

In a Phanteks Enthoo Pro case with an Aorus 1080 Ti graphics card, it doesn't fit because the card interferes with the CPU air cooling. So, I thought of trying a workaround by cutting the pins that support the vertical part and opening holes slightly lower as needed, and then screwing them in.

No matter how much I searched, I couldn't find any similar-sized card that fits with CPU air cooling, only with liquid cooling. It fits comfortably there.

Nevertheless, the visual result is perfect

Entered NZXT H510. Good construction, I consider it a bit expensive for what it offers. If you have a black case, it fits perfectly, otherwise, I think it will be fine with spray.

It was purchased for better cable management and specifically for better organization in the case.
It was installed in a Lian Li Dynamic without any issues (took me 5 minutes).
A 6800xt was installed in Gen3 mode.
I didn't see any temperature difference, it's exactly the same.
You can adjust it to any size you want for any card you have.
It has good quality construction and the price is very good (50 euros purchase)

Anyone who has this Inter-Tech W-III RGB box should not buy it because it needs a small modification and the cable is too long and difficult to fit. Overall, the construction is very good :D

WARNING ONLY FOR PCIE 3.0, anyone with a PCIE 4.0 new generation card will not work with this specific one.
High-quality construction, easy installation. I used it in a Lian Li case for an Aorus GTX 1080ti and the results were amazing. I didn't expect that besides the visual aspect, it would also be more beautiful and have a temperature drop of 5-10 degrees. The maximum temperature I have seen with this setup does not exceed 75 degrees, while when it was horizontal, I was seeing 80-85 degrees.

January 23, 2021
And I switched to a new generation card that supports PCI Express 4, and unfortunately, it does not work, it does not cooperate with this specific protocol

Sturdy construction and keep the card stable. The only negative is that the braid was not working for me and I had to buy another one in order to be able to work with it.

Very good construction and sturdy, worth its money, I highly recommend it without reservation!!!