Skroutz.cy

Bizzi & Tedeschi SX50/21 Single-phase Pump Drilling 1.5hp 101127
Submersible Water Pumps

Bizzi & Tedeschi SX50/21 Single-phase Pump Drilling 1.5hp 101127

FEATURES OF BIZZI&TEDESCHI PUMP

  • Clean water pump suitable for residential, urban, or industrial use.
  • Can pump water with sand up to 350g/m³.
  • Suitable for irrigation, pressure systems, etc.
  • Pump Type:...

FEATURES OF BIZZI&TEDESCHI PUMP

  • Clean water pump suitable for residential, urban, or industrial use.
  • Can pump water with sand up to 350g/m³.
  • Suitable for irrigation, pressure systems, etc.
  • Pump Type: Radial flow
  • Liquid pumping capacity: Clean water
  • Max head: 146.00 m
  • Max flow rate: 3.00 m³/h
  • Body material: Stainless steel AISI 304
  • Impeller material: Plastic...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    146

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
329 88 €
330 Coins 330 Coins
Delivery Wed, 22 Jul - Fri, 24 Jul
7,00 € shipping cost
Do you want it with 2,00 € shipping?
Sent from Greece
From Thermocity 4.8 (67)
4.8 (67 reviews)
Greece
20+ pieces
See Water Pumps on the page of Thermocity
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

FEATURES OF BIZZI&TEDESCHI PUMP

  • Clean water pump suitable for residential, urban, or industrial use.
  • Can pump water with sand up to 350g/m³.
  • Suitable for irrigation, pressure systems, etc.
  • Pump Type: Radial flow
  • Liquid pumping capacity: Clean water
  • Max head: 146.00 m
  • Max flow rate: 3.00 m³/h
  • Body material: Stainless steel AISI 304
  • Impeller material: Plastic (NORYL)
  • Pumped liquid temperature: 35 °C
  • Net weight: 6.90 Kg
  • Maximum sand content: 350 g/m³
  • Max RPM: 2850 RPM

FEATURES OF ELECTRIC MOTOR

  • Power supply: Electric Current
  • Energy supply capacity: 1.50Hp - 1100 Watt
  • Voltage: 220 Volt/50 Hz
  • Cooling: Oil-cooled
  • Absorption: 8.20 A
  • Max RPM: 2800 RPM
  • Body material: Stainless steel AISI 304
  • Pumped liquid temperature: 30 °C
  • Maximum submersion depth: 150 m
  • Net weight: 10.50 Kg
  • Average starts per hour: 20
  • Minimum cooling flow speed: 8 cm/sec

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1125 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
146 m

Maximum Head Height: 146


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
3 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
146 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

FEATURES OF BIZZI&TEDESCHI PUMP

  • Clean water pump suitable for residential, urban, or industrial use.
  • Can pump water with sand up to 350g/m³.
  • Suitable for irrigation, pressure systems, etc.
  • Pump Type: Radial flow
  • Liquid pumping capacity: Clean water
  • Max head: 146.00 m
  • Max flow rate: 3.00 m³/h
  • Body material: Stainless steel AISI 304
  • Impeller material: Plastic (NORYL)
  • Pumped liquid temperature: 35 °C
  • Net weight: 6.90 Kg
  • Maximum sand content: 350 g/m³
  • Max RPM: 2850 RPM

FEATURES OF ELECTRIC MOTOR

  • Power supply: Electric Current
  • Energy supply capacity: 1.50Hp - 1100 Watt
  • Voltage: 220 Volt/50 Hz
  • Cooling: Oil-cooled
  • Absorption: 8.20 A
  • Max RPM: 2800 RPM
  • Body material: Stainless steel AISI 304
  • Pumped liquid temperature: 30 °C
  • Maximum submersion depth: 150 m
  • Net weight: 10.50 Kg
  • Average starts per hour: 20
  • Minimum cooling flow speed: 8 cm/sec

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1125 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
146 m

Maximum Head Height: 146


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
3 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
146 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

329,88 €
7,00 € 12,00 €   shipping cost