Skroutz.cy

Bizzi & Tedeschi SX150/34 Pump Drilling (without Motor) 101140
Submersible Water Pumps

Bizzi & Tedeschi SX150/34 Pump Drilling (without Motor) 101140

Clean water pump suitable for residential, urban, or industrial use.

  • Type: SX150/34
  • Pump Type: Radial flow
  • Power Supply: Electric Current
  • Pumping cross-section: 4"-100mm
  • Power: 5.5Hp-4Kw
  • Usage: Clean...

Clean water pump suitable for residential, urban, or industrial use.

  • Type: SX150/34
  • Pump Type: Radial flow
  • Power Supply: Electric Current
  • Pumping cross-section: 4"-100mm
  • Power: 5.5Hp-4Kw
  • Usage: Clean water
  • Discharge outlet diameter: 2"-50mm
  • Max Head: 238.00m
  • Max Flow: 9.00m3/h
  • Body material construction: Stainless steel AISI 304
  • Impeller material...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    238

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
675 00 €
Delivery Thu, 16 Jul - Mon, 20 Jul
26,00 € shipping cost
Do you want it with 21,00 € shipping?
Sent from Greece
From Thermocity 4.8 (67)
4.8 (67 reviews)
Greece
20+ pieces
See Water Pumps on the page of Thermocity
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Clean water pump suitable for residential, urban, or industrial use.

  • Type: SX150/34
  • Pump Type: Radial flow
  • Power Supply: Electric Current
  • Pumping cross-section: 4"-100mm
  • Power: 5.5Hp-4Kw
  • Usage: Clean water
  • Discharge outlet diameter: 2"-50mm
  • Max Head: 238.00m
  • Max Flow: 9.00m3/h
  • Body material construction: Stainless steel AISI 304
  • Impeller material construction: Plastic (NORYL)
  • Pumped liquid temperature: 35°C
  • Net weight: 13.00Kg
  • Maximum sand content: 350g/m3
  • Max RPM: 2850RPM

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
5.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
4125 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
238 m

Maximum Head Height: 238


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Clean water pump suitable for residential, urban, or industrial use.

  • Type: SX150/34
  • Pump Type: Radial flow
  • Power Supply: Electric Current
  • Pumping cross-section: 4"-100mm
  • Power: 5.5Hp-4Kw
  • Usage: Clean water
  • Discharge outlet diameter: 2"-50mm
  • Max Head: 238.00m
  • Max Flow: 9.00m3/h
  • Body material construction: Stainless steel AISI 304
  • Impeller material construction: Plastic (NORYL)
  • Pumped liquid temperature: 35°C
  • Net weight: 13.00Kg
  • Maximum sand content: 350g/m3
  • Max RPM: 2850RPM

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
5.5 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
4125 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
238 m

Maximum Head Height: 238


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

675,00 €
26,00 € 31,00 €   shipping cost