Surface Preparation: The surface must be dry, stable, and free from dust, other residues, and loose old paints. In the case of old rust, sand the surface with appropriate sandpaper. For surface cleaning, use KRAFT BRUSH SOLVENT. Wet sanding is recommended for surface preparation.

• On new surfaces: Before applying the paint, apply 1-2 coats of KRAFT RUST BLOCKER and lightly sand with wet sanding after 24h.
• On painted surfaces: Remove all residues of loose paints and apply 1-2 coats of KRAFT RUST BLOCKER. After 24h, lightly sand the surface and apply the appropriate final paint.

Application Instructions: Ready to use. If necessary, before starting painting, dilute 5-10% v/v with KRAFT BRUSH SOLVENT and mix well. In case of application with an air gun, dilute 5-10% v/v with KRAFT NITRO 1100. Suitable painting tools are: brush, roller, or air gun. Apply 1-2 coats of KRAFT RUST BLOCKER for an ideal result. Then apply 2 coats of KRAFT final paint.

Post-Application Instructions: Clean tools immediately after use with KRAFT BRUSH SOLVENT and then with warm water and soap. Seal the container well to keep it in good condition for future use and store it before and after use in a cool place away from sun exposure or frost.