Kraft Haft acrylic primer is suitable for interior and exterior use on masonry, such as walls, plaster and cement boards. It contains acrylic resins that penetrate the surface, reduce its absorbency and improve the adhesion of the topcoat. It increases the coverage and durability of the final paint.
Apply to new, properly prepared surfaces or painted surfaces with a sound substrate. The surface must be dry, stable and free of dust, residue and loose old paint. Before use, dilute with water at 300–400% by volume and mix thoroughly. Apply one coat with a brush, roller or airless spray gun. The minimum time before recoating is 4–6 hours.
- Type: Primer
- Composition: Acrylic, water-based
- Surfaces: Interior and exterior
- Substrates: Masonry, walls, plaster, cement boards
- Volume: 0.75 L
- Dilution: 300–400% by volume with water
- Application tools: Brush, roller or airless spray gun
- Primer coats: 1
- Recoating time: 4–6 hours
- Surface drying time: 1–3 hours at 25°C and 50% relative humidity
- Application temperature: 10°C to 35°C
- Relative humidity during application: Up to 65%
- Tool cleaning: Immediately after use, with soap and water
- Storage: Store in a cool place, away from sunlight and frost
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water
Quantity
- Mass Gaining
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.