Vitex Radiater radiator enamel is alkyd-based and intended for heated metal surfaces, such as radiators and boiler covers. It withstands temperatures up to 100 °C without yellowing or peeling, while offering flexibility, good flow and adhesion.
Apply two coats using a roller or brush, thinning by 5% with Brush Thinner T 300, or using an airless spray gun, thinning by 5% with Spray Gun Thinner T 350. It is touch-dry in 2–3 hours and can be recoated after 20–24 hours. Painted surfaces can be washed after 30 days.
- Type: Solvent-based metal enamel
- Composition: Alkyd resins
- Colour: White
- Finish: Gloss
- Suitable for: Heated metal surfaces
- Temperature resistance: Up to 100 °C
- Quantity: 2.5 lt
- Surface preparation: Clean, dry and smooth, free of dust and oil, and sanded with suitable sandpaper
- Application conditions: Temperature 5–35 °C and relative humidity up to 80%
- Tool cleaning: With Brush Thinner T 300 or Spray Gun Thinner T 350, depending on the tool
- Warnings: Flammable liquid and vapour; causes serious eye irritation; may cause drowsiness or dizziness
Product Details
- Type
- Metal
- Type
- Varnish Colour
- Colour
- White
- Quantity in lt
- 2.5 lt
Especially
- Properties
- Radiator
- Finish
- Shiny
- Acrilyc
- No
- Water
- No
- Solvent
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.