High-quality water-based acrylic cement paint, specially formulated for direct application on exposed concrete, plaster, bricks, and other alkaline surfaces. It offers great coverage, unmatched performance, and excellent resistance to washing and adverse weather conditions.

Surfaces must be clean, dry, and smooth, free of dust, oils, or any loose materials. For filling holes and spatulaing any cracks, Acrylic Building Putty is used. Old water-painted surfaces (with lime or glue) are primed with Durovit or Acrylan Unco Eco or Vitosin. New surfaces made of plaster, concrete, bricks, etc., as well as spatulaed surfaces, are primed with Durovit or Acrylan Unco Eco.

The product should be stirred well before use. It is applied in two coats with a roller, brush, or airless spray gun and diluted up to 10% with water. It should not be applied at temperatures below 5°C, above 35°C, and/or relative humidity over 70% or if there is a risk of rain or frost in the next forty-eight hours. The product is dry to the touch in 30-60 minutes and can be recoated after 3-4 hours. These times vary depending on weather conditions (relative humidity and temperature). Surfaces painted with Water Cement Paint can be washed using a soft sponge with water and in case of stubborn stains with a mild, colorless detergent, after at least three weeks from painting. Tools should be cleaned immediately after use with water and if necessary with soap or detergent.