I bought it to occasionally connect an internal SATA CD-RW/DVD drive that I removed from my PC because I rarely need it and I wanted to replace it with an additional SSD drive. Indeed, because the Ugreen adapter has an external power supply, it supports not only HDD hard drives but also SATA CD/DVD drives. Everything works perfectly, it immediately recognized some SATA HDDs that I had, the drive read my old CDs and DVDs, the packaging and the device itself are extremely well-designed, and the use of the device is very easy, plug 'n' play.
I should note that the external power supply is only needed when connecting an HDD or a CD/DVD drive. If you are going to connect an SSD drive, additional power is not necessary.
The speed was satisfactory, I connected an SSD drive to the adapter and copied 50GB to another internal SSD, and the speed reached 240 MB/sec.
======
USAGE
======
Because it sometimes got stuck and didn't recognize the disk I inserted, I consider the correct connection order to be as follows:
1) First, I connect only the adapter to the USB port. I wait to see if it is recognized by Windows and assigned a drive letter.
2) Then, if necessary, I plug in the external power supply.
3) Lastly, I connect the desired disk or CD drive.
Το αγόρασα για να συνδέω περιστασιακά ένα εσωτερικό SATA CD-RW/DVD drive που έβγαλα από το PC διότι σπανίως το χρειάζομαι και ήθελα να βάλω στη θέση του έναν επιπλέον SSD δίσκο. Πράγματι λοιπόν, επειδή ο αντάπτορας της Ugreen έχει και εξωτερική τροφοδοσία, υποστηρίζει όχι μόνο HDD σκληρούς αλλά και SATA CD/DVD. Όλα δουλεύουν άψογα, είδε αμέσως κάποιους SATA HDD που είχα, το drive διάβασε τα παλιά μου CD και DVD, η συσκευασία και η συσκευή είναι εξαιρετικά προσεγμένα στη σχεδίαση και η χρήση της συσκευής πολύ εύκολη, plug 'n' play.
Να επισημάνω ότι η εξωτερική τροφοδοσία χρειάζεται μόνο όταν συνδέουμε HDD ή κάποιο CD/DVD drive. Αν πρόκειται να συνδέσουμε SSD δίσκο δεν χρειάζεται επιπλέον ρεύμα.
Η ταχύτητα ήταν ικανοποιητική, προσάρμοσα στον αντάπτορα έναν SSD δίσκο και αντέγραψα 50GB σε άλλον εσωτερικό SSD και η ταχύτητα έφτασε τα 240 MB/sec.
======
ΧΡΗΣΗ
======
Επειδή κάποια φορά κόλλησε και δεν αναγνώρισε τον δίσκο που έβαλα, θεωρώ ότι η σωστή σειρά σύνδεσης είναι η εξής:
1) Πρώτα συνδέω μόνο του τον αντάπτορα στη θύρα USB. Περιμένω να δω ότι αναγνωρίστηκε από τα Windows και πήρε γράμμα ως επιπλέον drive.
2) Κατόπιν (αν χρειάζεται) βάζω το βύσμα της εξωτερικής τροφοδοσίας.
3) Τελευταίο συνδέω τον δίσκο που θέλω ή το CD Drive.