Technical Specifications:

• Device capacity: 1200 W
• Maximum operating pressure: 220 bar (constant)
• Flow rate: up to 1.5 L/min
• Maximum medium viscosity: 110 DIN-s
• Maximum nozzle size: 0.019" (0.48 mm)
• Motor type: DC switch
• Compression mechanism: piston pump
• Weight: 5.9 kg
• Hose length: 7.5 m

Main Features and Usage:

Hydrodynamic paint spray guns are used to paint almost all common building surfaces, including walls inside and outside residential and industrial buildings. They are suitable for applying emulsions, acrylic paints, latex, water-absorbent paints, and varnishes, as well as mortars. Hydrodynamic painting involves compressing the paint and spraying it without the use of air onto painted surfaces. It consumes less paint compared to painting with a roller or brush. Painting large surfaces in a single color, such as apartments, garages, shops, metal structures, and industrial halls, takes four times less time compared to traditional painting. You can paint vertically and horizontally. The unit is mobile and convenient to use.

Equipment:

• PM-PDM-1200 paint unit
• Original packaging
• Suction hose with filter
• Paint gun with spray nozzle
• Gun extension (50cm)
• TSL lubricant 250ml (for maintaining the upper seals of the paint units)
• Nozzle for gun 515 (hole 0.015" - spray angle 50°, capacity approximately 0.87 l/min)
• Nozzle for gun 517 (hole 0.017" - spray angle 50°, capacity approximately 1.13 l/min) - (universal size for emulsions and latex paints)

The included gun operates with a wide range of nozzles from various manufacturers available on the market. Our set includes, among other things, a 517 nozzle, which is excellent for painting with emulsion and latex paint. If there is an interruption of a few minutes during operation, lock the gun trigger and immerse the nozzle in a container with a suitable solvent or water, if it is a water-soluble paint. This will prevent the paint from hardening. Do not forget to release the pressure in the generator. If the nozzle is clogged, clean it by turning it from the SPRAY position (arrow towards gun outlet) 180 degrees to the CLEAN position (opposite arrow towards gun outlet). If such cleaning does not help, check the filter in the gun handle.