Skroutz.cy

DEOS 353CV Electric Pulse Sander 250W with Speed Control and with Suction System MID3530201
Sanders

DEOS 353CV Electric Pulse Sander 250W with Speed Control and with Suction System MID3530201

The Mirka DEOS 353CV orbital sander is designed for sanding large surfaces with its rectangular base. The speed control lets you adjust its operation, while the dust extraction system collects debris...

The Mirka DEOS 353CV orbital sander is designed for sanding large surfaces with its rectangular base. The speed control lets you adjust its operation, while the dust extraction system collects debris during use.

  • Type: Orbital sander
  • Power supply: Mains-powered
  • Power: 250 W
  • Dust extraction system: Yes
  • Speed control: Yes
  • Sanding sheet dimensions: 130 80
  • ...
See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    3

    General sanding, wood or paint finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 970 gr
  • See all

User Manual

Lowest price '26 1 variation has

Power

  1. 250 W

    from 710,16 €

  2. 300 W

    from 642,98 €

    Lowest price '26

Sandpaper dimensions

  1. 130x80 mm

    from 710,16 €

  2. 198x70 mm

    from 680,00 €

  3. 133x80 mm

    from 642,98 €

    Lowest price '26

Carrying case

  1. Hard Case

    from 680,00 €

  2. Without

    from 710,16 €

710 16 €
Delivery Thursday, 12 November
Free shipping cost
Sent from Greece
From Mplanas 4.9 (52)
4.9 (52 reviews)
Greece
2 pieces
See Power Tools on the page of Mplanas

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The Mirka DEOS 353CV orbital sander is designed for sanding large surfaces with its rectangular base. The speed control lets you adjust its operation, while the dust extraction system collects debris during use.

  • Type: Orbital sander
  • Power supply: Mains-powered
  • Power: 250 W
  • Dust extraction system: Yes
  • Speed control: Yes
  • Sanding sheet dimensions: 130 × 80
  • Rotational speed: 10000

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
3 mm

Oscillation Range: 3

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Net Weight
970 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
250 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
-

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
69 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
130x80 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

The Mirka DEOS 353CV orbital sander is designed for sanding large surfaces with its rectangular base. The speed control lets you adjust its operation, while the dust extraction system collects debris during use.

  • Type: Orbital sander
  • Power supply: Mains-powered
  • Power: 250 W
  • Dust extraction system: Yes
  • Speed control: Yes
  • Sanding sheet dimensions: 130 × 80
  • Rotational speed: 10000

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
3 mm

Oscillation Range: 3

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Net Weight
970 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
250 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
-

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
10000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
69 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
Yes

Sandpaper / Belt Specifications

Sandpaper Dimensions
130x80 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

710,16 €
Free   shipping cost

Mirka