Camera Gimbals & Stabilizers

Zhiyun Gimbal Weebill-S C000215 3 way Code: C000215

The Zhiyun Weebill-S stabilizer features three axes, upgraded motors, and a stabilization algorithm. The rear handle makes it easier to switch to underslung mode and operate the gimbal in other modes....

The Zhiyun Weebill-S stabilizer features three axes, upgraded motors, and a stabilization algorithm. The rear handle makes it easier to switch to underslung mode and operate the gimbal in other modes. The motors’ increased torque and faster response help balance camera and lens combinations such as the Canon 5D Mark IV with a 24–70 mm zoom lens.

The gimbal...

See full description See full description
289 00 €
Delivery Thursday, 12 November
Free shipping cost
Sent from Greece
From Albapv
Greece
See Tripods, Monopods & Gimbals on the page of Albapv
What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing

Description

Description

The Zhiyun Weebill-S stabilizer features three axes, upgraded motors, and a stabilization algorithm. The rear handle makes it easier to switch to underslung mode and operate the gimbal in other modes. The motors’ increased torque and faster response help balance camera and lens combinations such as the Canon 5D Mark IV with a 24–70 mm zoom lens.

The gimbal is compatible with mirrorless and DSLR cameras, as well as the optional TransMount wireless image transmission module. The module supports wireless transmission up to 1080p30 and a range of up to 328 ft, with the ability to connect up to three devices using compatible receivers.

  • Axes: 3
  • Motor torque: 300% greater
  • Response: 50% faster
  • Payload: Up to 3.2 kg
  • Pan range: 360°, with unlimited rotation
  • Tracking deviation in motion mode: Maximum ±0.3°, normal ±0.1°, minimum ±0.05°
  • Tracking deviation in static mode: Maximum ±0.04°, minimum ±0.01°
  • Mechanical tilt range: Maximum ±182°, normal ±314°, minimum ±132°
  • Mechanical roll range: Maximum ±247°, normal ±314°, minimum ±67°
  • Operating voltage: 6.8–8.4 V
  • Output voltage: 5 V
  • Battery life: Up to 14 hours, typically 12 hours
  • Charging time: 2.5 hours
  • Operating temperature: -10 °C to 45 °C, typically 25 °C

Manufacturer

See full description

Specifications

Specifications

Product Number
C000215
Number of Axes
3 way
Bluetooth
No
Built-in Light
No
Maximum Load
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (8)

Reviews

  1. 4
  2. 1
  3. 3 stars
    0
  4. 1
  5. 2
Review this product
  • Stability
  • Value for money
  • Construction quality
  • Moderate difficulty to use

What do users say? AI-generated summary

Users generally appreciate the Weebill-S’s stabilization and lightweight, compact design. They also report good battery life, easy balancing, and the ability to support relatively heavy equipment. However, some mention reliability issues, such as problems with the controller or firmware, and say it needs to be rebalanced after packing.

Reviews by our members

  • kinikos
    5
    3 out of 3 members found this review helpful

    Verified purchase

    Very good gimbal, I used it five times and it didn't disappoint me, and the batteries lasted all day filming. Stable, lightweight, and relatively cheap.

    Translated from Greek ·
    • Stability
    • Easy to use
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • kostas_restas
    5
    9 out of 9 members found this review helpful

    After using the Ronin sc, I can say that the Weebill s is better. It is much more convenient to have with you and has powerful mechanisms. It is also very lightweight. With the a7iii and tamron 28 75, it has no issues at all, but even with heavier GM lenses, it has no problem. With a simple quick release plate, you can attach your camera without having to adjust it again and again. The auto balance does a great job, even if someone inexperienced hasn't perfected the "balancing". The fact that it has a handle base diagonally makes it very functional for low-angle shots. Super battery.

    Translated from Greek ·
    • Stability
    • Easy to use
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • KonstantinosBt
    1
    1 out of 6 members found this review helpful

    Verified purchase

    I had it for 3 months until the joystick broke during a wedding... On the positive side, it is small, convenient, and easy to balance, but that's about it. I generally don't leave bad reviews, but if someone is considering it as a budget option, the Ronin SC would be much better than getting this and having it break within 3 months because the build quality is terrible

    Translated from Greek ·
    • Easy to use
    • Stability
    • Value for money
    • Construction quality
    Did you find this review helpful?
  • grdaemon
    4
    6 out of 7 members found this review helpful

    Verified purchase

    I haven't used it extensively, but it does everything it promises so far. Unfortunately, it doesn't come packaged as you have it ready calibrated. You have to calibrate it from scratch every time, so I deducted one star for that. Also, for the price, it wouldn't be bad if they included a plastic backpack for 2 euros that could fit its styrofoam box.

    Translated from Greek ·
    Did you find this review helpful?
  • billy_the_kid
    5
    66 out of 66 members found this review helpful

    !!!!FOR NIKON USERS READ BELOW!!!!

    The most compact gimbal on the market for cameras up to 3 kilograms. Without having used any other gimbal and having had this one in my possession for the last 3 months, I have the following to say.

    It is sturdy in terms of equipment weight. Tested with a camera, lens, and filters weighing 2.2 kilograms, I had the motor set to its medium setting and it worked even on the low setting without any problems.

    It does the job it is intended for and more. Very smooth in videography without any vibrations, even while running (watch videos on YouTube to get a better idea).

    Build quality, perhaps its weak point, but this only applies to the location of the buttons, where it could have been more refined. Otherwise, it has a very sturdy metal construction that seems to withstand the test of time.

    The battery has incredible endurance, even with heavy equipment, it lasts for hours. Speaking for myself, my hands get tired first to the point where I can't handle it anymore, and the battery is still halfway charged.

    Now, the most important part. Compatibility with NIKON DSLRs specifically for d750 and d5200, based on my experience and information found on the internet.
    For video, yes, it functions as a gimbal, but there is absolutely no compatibility (as stated by the company) unless you follow these instructions. By purchasing the additional accessory cmf-04 servo follow focus mechanism for about 100 euros (brand new), you can solve the known focusing issue on all Nikon DSLR cameras except for d850 and d780. And now comes the best part regarding camera control. By connecting your mobile phone and camera with an OTG cable and the Nikon cable, and downloading the amazing qdslrdashboard app (around 10 euros), you have the perfect combination for videography. Your mobile phone becomes an automatic external monitor with all camera controls available, and the best part is the focus peak screen and histogram (if you were to buy them separately, it would cost over 200 euros). Focusing becomes easy with a little practice and the right settings on the gimbal.

    And now let's talk about compatibility for photos. For this specific aspect, I haven't found any references on the internet, and I managed to achieve it through my own experiments. By downloading the official zy play app from Zhiyun and connecting the camera to the gimbal again with an OTG cable, the compatibility becomes complete for fantastic panoramas and timelapse videos.

    Some of the lenses that I managed to balance without any issues with the d750, just to name a few:
    Sigma 14 f2.8
    Sigma 20 f1.8
    Sigma 28 f1.8
    Nikon 35 f2
    Nikon 50 f1.4 non-AIS
    Nikon 60 2.8 micro
    Nikon 85 1.4d
    Nikon 85 f2.8 pc
    Nikon 105 f2.8 micro
    Nikon 135 f2 dc
    Nikon 35-70 f2.8 (be careful with the zoom)
    All of these in combination with large square filters measuring 125mm.

    With the use of counterweights:
    Nikon 28-70 2.8
    Nikon 180 2.8 with limited movement
    Nikon 70-200 2.8 VR with limited movement

    The d5200 required counterweights or a battery grip for some of these lenses.

    UPDATE 19/6/2021
    After 1 year of use, I will add a few more comments about this stabilizer.
    For those considering ease of use, yes, the gimbal takes quite some time to set up. Personally, it takes me 10 to 15 minutes to prepare it for videography, including setting up the follow focus, which takes about 5-7 minutes on its own.

    Zhiyun continues to support with updates and there are video reviews for each one separately by Peter Makholm on YouTube. Keep the firmware files stored on your computer because Zhiyun does not have an archive for older ones if needed, but you can find them on Peter Makholm's website with a small donation.

    If you need to prepare it before shooting, it cannot be stored in its box but can be stored in another case without any problem. Simply remove the camera from the front button (release button), put all the arms in the storage position, and lock them with the red buttons (locks). Then, when you open it again, it will be ready and balanced.

    The gimbal performs better in stability with an extra grip or even better with two if you don't use the central control buttons. It doesn't have to be the original one, there are various options available in the market.

    The screws provided in the package to attach the camera to the base are difficult to use and require a screwdriver or a coin to tighten. Replace them with 1/4'' d-ring screws (google it)

    Translated from Greek ·
    • Stability
    • Construction quality
    • Value for money
    • Moderate difficulty to use
    Did you find this review helpful?
  • After 2 months of use, it had a problem with the firmware.
    It is now out of order!

    Translated from Greek ·
    Did you find this review helpful?
    • Stability
    • Difficult to use
    • Construction quality
    • Value for money
    • Stability
    • Construction quality
    • Value for money
    • Moderate difficulty to use
  • Very good gimbal, I used it five times and it didn't disappoint me, and the batteries lasted all day filming. Stable, lightweight, and relatively cheap.

    Translated from Greek ·
    3
  • After using the Ronin sc, I can say that the Weebill s is better. It is much more convenient to have with you and has powerful mechanisms. It is also very lightweight. With the a7iii and tamron 28 75, it has no issues at all, but even with heavier GM lenses, it has no problem. With a simple quick release plate, you can attach your camera without having to adjust it again and again. The auto balance does a great job, even if someone inexperienced hasn't perfected the "balancing". The fact that it has a handle base diagonally makes it very functional for low-angle shots. Super battery.

    Translated from Greek ·
    9
  • I had it for 3 months until the joystick broke during a wedding... On the positive side, it is small, convenient, and easy to balance, but that's about it. I generally don't leave bad reviews, but if someone is considering it as a budget option, the Ronin SC would be much better than getting this and having it break within 3 months because the build quality is terrible

    Translated from Greek ·
    1
  • I haven't used it extensively, but it does everything it promises so far. Unfortunately, it doesn't come packaged as you have it ready calibrated. You have to calibrate it from scratch every time, so I deducted one star for that. Also, for the price, it wouldn't be bad if they included a plastic backpack for 2 euros that could fit its styrofoam box.

    Translated from Greek ·
    6
  • !!!!FOR NIKON USERS READ BELOW!!!!

    The most compact gimbal on the market for cameras up to 3 kilograms. Without having used any other gimbal and having had this one in my possession for the last 3 months, I have the following to say.

    It is sturdy in terms of equipment weight. Tested with a camera, lens, and filters weighing 2.2 kilograms, I had the motor set to its medium setting and it worked even on the low setting without any problems.

    It does the job it is intended for and more. Very smooth in videography without any vibrations, even while running (watch videos on YouTube to get a better idea).

    Build quality, perhaps its weak point, but this only applies to the location of the buttons, where it could have been more refined. Otherwise, it has a very sturdy metal construction that seems to withstand the test of time.

    The battery has incredible endurance, even with heavy equipment, it lasts for hours. Speaking for myself, my hands get tired first to the point where I can't handle it anymore, and the battery is still halfway charged.

    Now, the most important part. Compatibility with NIKON DSLRs specifically for d750 and d5200, based on my experience and information found on the internet.
    For video, yes, it functions as a gimbal, but there is absolutely no compatibility (as stated by the company) unless you follow these instructions. By purchasing the additional accessory cmf-04 servo follow focus mechanism for about 100 euros (brand new), you can solve the known focusing issue on all Nikon DSLR cameras except for d850 and d780. And now comes the best part regarding camera control. By connecting your mobile phone and camera with an OTG cable and the Nikon cable, and downloading the amazing qdslrdashboard app (around 10 euros), you have the perfect combination for videography. Your mobile phone becomes an automatic external monitor with all camera controls available, and the best part is the focus peak screen and histogram (if you were to buy them separately, it would cost over 200 euros). Focusing becomes easy with a little practice and the right settings on the gimbal.

    And now let's talk about compatibility for photos. For this specific aspect, I haven't found any references on the internet, and I managed to achieve it through my own experiments. By downloading the official zy play app from Zhiyun and connecting the camera to the gimbal again with an OTG cable, the compatibility becomes complete for fantastic panoramas and timelapse videos.

    Some of the lenses that I managed to balance without any issues with the d750, just to name a few:
    Sigma 14 f2.8
    Sigma 20 f1.8
    Sigma 28 f1.8
    Nikon 35 f2
    Nikon 50 f1.4 non-AIS
    Nikon 60 2.8 micro
    Nikon 85 1.4d
    Nikon 85 f2.8 pc
    Nikon 105 f2.8 micro
    Nikon 135 f2 dc
    Nikon 35-70 f2.8 (be careful with the zoom)
    All of these in combination with large square filters measuring 125mm.

    With the use of counterweights:
    Nikon 28-70 2.8
    Nikon 180 2.8 with limited movement
    Nikon 70-200 2.8 VR with limited movement

    The d5200 required counterweights or a battery grip for some of these lenses.

    UPDATE 19/6/2021
    After 1 year of use, I will add a few more comments about this stabilizer.
    For those considering ease of use, yes, the gimbal takes quite some time to set up. Personally, it takes me 10 to 15 minutes to prepare it for videography, including setting up the follow focus, which takes about 5-7 minutes on its own.

    Zhiyun continues to support with updates and there are video reviews for each one separately by Peter Makholm on YouTube. Keep the firmware files stored on your computer because Zhiyun does not have an archive for older ones if needed, but you can find them on Peter Makholm's website with a small donation.

    If you need to prepare it before shooting, it cannot be stored in its box but can be stored in another case without any problem. Simply remove the camera from the front button (release button), put all the arms in the storage position, and lock them with the red buttons (locks). Then, when you open it again, it will be ready and balanced.

    The gimbal performs better in stability with an extra grip or even better with two if you don't use the central control buttons. It doesn't have to be the original one, there are various options available in the market.

    The screws provided in the package to attach the camera to the base are difficult to use and require a screwdriver or a coin to tighten. Replace them with 1/4'' d-ring screws (google it)

    Translated from Greek ·
    66
  • See all
Questions (4)

Questions

6 users have this product and can help you

Ask for the product
Houlio_Din

καλησπέρα!
ξέρει κάποιος αν μπορώ να βάλω άλλη πλάκα γρήγορης απελευθέρωσης από το gimbal στο τρίποδο BENRO A1883FS2PRO;

grdaemon

Η κάμερα (αν εννοείς αυτό ) κουμπώνει στο gimbal με την επισυναπτόμενη πλάκα τύπου arca Swiss . Αν το τρίποδο σου ειναι συμβατό τότε είσαι οκ αλλιώς θα χρειαστείς κεφαλή συμβατή με arca επίσης . Ωστόσο το gimbal είναι out of support τουλάχιστον σε υποστήριξη εδώ στην Ελλάδα και γιαυτο τον λόγο και μόνο θα το απέφευγα

grdaemon

Φυσικά είναι. Εγώ φορτώνω 5d mark iv και φακό ef24-105. Αν χρειάζεσαι όμως vertical λήψεις θα χρειαστείς ένα L bracket που η αντιπροσωπεία κατήργησε χωρίς κανένα λόγο και θα πρέπει να το βρεις after market

dimoskon07

Λένε οτι δεν μπορείς να ελέγξεις Iso,Aperture,Shutter, focus μέσω του Gimbal για Sony μηχανές (έχω 6400) ισχύει?

billy_the_kid

Θα πρεπει να αλλάξεις απο τις ρυθμίσεις της sony σε pc remote usb mode και από το weebill s την ρύθμιση της κάμερας σε canon (ναι canon!!!). Ετσι χειρίζεσαι iso,aperture,shutter αλλά δεν γνωρίζω για zoom και focus.

See all questions (4)

Description & Specifications

The Zhiyun Weebill-S stabilizer features three axes, upgraded motors, and a stabilization algorithm. The rear handle makes it easier to switch to underslung mode and operate the gimbal in other modes. The motors’ increased torque and faster response help balance camera and lens combinations such as the Canon 5D Mark IV with a 24–70 mm zoom lens.

The gimbal is compatible with mirrorless and DSLR cameras, as well as the optional TransMount wireless image transmission module. The module supports wireless transmission up to 1080p30 and a range of up to 328 ft, with the ability to connect up to three devices using compatible receivers.

  • Axes: 3
  • Motor torque: 300% greater
  • Response: 50% faster
  • Payload: Up to 3.2 kg
  • Pan range: 360°, with unlimited rotation
  • Tracking deviation in motion mode: Maximum ±0.3°, normal ±0.1°, minimum ±0.05°
  • Tracking deviation in static mode: Maximum ±0.04°, minimum ±0.01°
  • Mechanical tilt range: Maximum ±182°, normal ±314°, minimum ±132°
  • Mechanical roll range: Maximum ±247°, normal ±314°, minimum ±67°
  • Operating voltage: 6.8–8.4 V
  • Output voltage: 5 V
  • Battery life: Up to 14 hours, typically 12 hours
  • Charging time: 2.5 hours
  • Operating temperature: -10 °C to 45 °C, typically 25 °C

Manufacturer

Product Number
C000215
Number of Axes
3 way
Bluetooth
No
Built-in Light
No
Maximum Load
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (8)

  1. 4
  2. 1
  3. 3 stars
    0
  4. 1
  5. 2
Review this product
  • Stability
  • Value for money
  • Construction quality
  • Moderate difficulty to use

What do users say? AI-generated summary

Users generally appreciate the Weebill-S’s stabilization and lightweight, compact design. They also report good battery life, easy balancing, and the ability to support relatively heavy equipment. However, some mention reliability issues, such as problems with the controller or firmware, and say it needs to be rebalanced after packing.

Reviews by our members

  • kinikos
    5
    3 out of 3 members found this review helpful

    Verified purchase

    Very good gimbal, I used it five times and it didn't disappoint me, and the batteries lasted all day filming. Stable, lightweight, and relatively cheap.

    Translated from Greek ·
    • Stability
    • Easy to use
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • kostas_restas
    5
    9 out of 9 members found this review helpful

    After using the Ronin sc, I can say that the Weebill s is better. It is much more convenient to have with you and has powerful mechanisms. It is also very lightweight. With the a7iii and tamron 28 75, it has no issues at all, but even with heavier GM lenses, it has no problem. With a simple quick release plate, you can attach your camera without having to adjust it again and again. The auto balance does a great job, even if someone inexperienced hasn't perfected the "balancing". The fact that it has a handle base diagonally makes it very functional for low-angle shots. Super battery.

    Translated from Greek ·
    • Stability
    • Easy to use
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • KonstantinosBt
    1
    1 out of 6 members found this review helpful

    Verified purchase

    I had it for 3 months until the joystick broke during a wedding... On the positive side, it is small, convenient, and easy to balance, but that's about it. I generally don't leave bad reviews, but if someone is considering it as a budget option, the Ronin SC would be much better than getting this and having it break within 3 months because the build quality is terrible

    Translated from Greek ·
    • Easy to use
    • Stability
    • Value for money
    • Construction quality
    Did you find this review helpful?
  • grdaemon
    4
    6 out of 7 members found this review helpful

    Verified purchase

    I haven't used it extensively, but it does everything it promises so far. Unfortunately, it doesn't come packaged as you have it ready calibrated. You have to calibrate it from scratch every time, so I deducted one star for that. Also, for the price, it wouldn't be bad if they included a plastic backpack for 2 euros that could fit its styrofoam box.

    Translated from Greek ·
    Did you find this review helpful?
  • billy_the_kid
    5
    66 out of 66 members found this review helpful

    !!!!FOR NIKON USERS READ BELOW!!!!

    The most compact gimbal on the market for cameras up to 3 kilograms. Without having used any other gimbal and having had this one in my possession for the last 3 months, I have the following to say.

    It is sturdy in terms of equipment weight. Tested with a camera, lens, and filters weighing 2.2 kilograms, I had the motor set to its medium setting and it worked even on the low setting without any problems.

    It does the job it is intended for and more. Very smooth in videography without any vibrations, even while running (watch videos on YouTube to get a better idea).

    Build quality, perhaps its weak point, but this only applies to the location of the buttons, where it could have been more refined. Otherwise, it has a very sturdy metal construction that seems to withstand the test of time.

    The battery has incredible endurance, even with heavy equipment, it lasts for hours. Speaking for myself, my hands get tired first to the point where I can't handle it anymore, and the battery is still halfway charged.

    Now, the most important part. Compatibility with NIKON DSLRs specifically for d750 and d5200, based on my experience and information found on the internet.
    For video, yes, it functions as a gimbal, but there is absolutely no compatibility (as stated by the company) unless you follow these instructions. By purchasing the additional accessory cmf-04 servo follow focus mechanism for about 100 euros (brand new), you can solve the known focusing issue on all Nikon DSLR cameras except for d850 and d780. And now comes the best part regarding camera control. By connecting your mobile phone and camera with an OTG cable and the Nikon cable, and downloading the amazing qdslrdashboard app (around 10 euros), you have the perfect combination for videography. Your mobile phone becomes an automatic external monitor with all camera controls available, and the best part is the focus peak screen and histogram (if you were to buy them separately, it would cost over 200 euros). Focusing becomes easy with a little practice and the right settings on the gimbal.

    And now let's talk about compatibility for photos. For this specific aspect, I haven't found any references on the internet, and I managed to achieve it through my own experiments. By downloading the official zy play app from Zhiyun and connecting the camera to the gimbal again with an OTG cable, the compatibility becomes complete for fantastic panoramas and timelapse videos.

    Some of the lenses that I managed to balance without any issues with the d750, just to name a few:
    Sigma 14 f2.8
    Sigma 20 f1.8
    Sigma 28 f1.8
    Nikon 35 f2
    Nikon 50 f1.4 non-AIS
    Nikon 60 2.8 micro
    Nikon 85 1.4d
    Nikon 85 f2.8 pc
    Nikon 105 f2.8 micro
    Nikon 135 f2 dc
    Nikon 35-70 f2.8 (be careful with the zoom)
    All of these in combination with large square filters measuring 125mm.

    With the use of counterweights:
    Nikon 28-70 2.8
    Nikon 180 2.8 with limited movement
    Nikon 70-200 2.8 VR with limited movement

    The d5200 required counterweights or a battery grip for some of these lenses.

    UPDATE 19/6/2021
    After 1 year of use, I will add a few more comments about this stabilizer.
    For those considering ease of use, yes, the gimbal takes quite some time to set up. Personally, it takes me 10 to 15 minutes to prepare it for videography, including setting up the follow focus, which takes about 5-7 minutes on its own.

    Zhiyun continues to support with updates and there are video reviews for each one separately by Peter Makholm on YouTube. Keep the firmware files stored on your computer because Zhiyun does not have an archive for older ones if needed, but you can find them on Peter Makholm's website with a small donation.

    If you need to prepare it before shooting, it cannot be stored in its box but can be stored in another case without any problem. Simply remove the camera from the front button (release button), put all the arms in the storage position, and lock them with the red buttons (locks). Then, when you open it again, it will be ready and balanced.

    The gimbal performs better in stability with an extra grip or even better with two if you don't use the central control buttons. It doesn't have to be the original one, there are various options available in the market.

    The screws provided in the package to attach the camera to the base are difficult to use and require a screwdriver or a coin to tighten. Replace them with 1/4'' d-ring screws (google it)

    Translated from Greek ·
    • Stability
    • Construction quality
    • Value for money
    • Moderate difficulty to use
    Did you find this review helpful?
  • After 2 months of use, it had a problem with the firmware.
    It is now out of order!

    Translated from Greek ·
    Did you find this review helpful?
    • Stability
    • Difficult to use
    • Construction quality
    • Value for money
    • Stability
    • Construction quality
    • Value for money
    • Moderate difficulty to use
  • Very good gimbal, I used it five times and it didn't disappoint me, and the batteries lasted all day filming. Stable, lightweight, and relatively cheap.

    Translated from Greek ·
    3
  • After using the Ronin sc, I can say that the Weebill s is better. It is much more convenient to have with you and has powerful mechanisms. It is also very lightweight. With the a7iii and tamron 28 75, it has no issues at all, but even with heavier GM lenses, it has no problem. With a simple quick release plate, you can attach your camera without having to adjust it again and again. The auto balance does a great job, even if someone inexperienced hasn't perfected the "balancing". The fact that it has a handle base diagonally makes it very functional for low-angle shots. Super battery.

    Translated from Greek ·
    9
  • I had it for 3 months until the joystick broke during a wedding... On the positive side, it is small, convenient, and easy to balance, but that's about it. I generally don't leave bad reviews, but if someone is considering it as a budget option, the Ronin SC would be much better than getting this and having it break within 3 months because the build quality is terrible

    Translated from Greek ·
    1
  • I haven't used it extensively, but it does everything it promises so far. Unfortunately, it doesn't come packaged as you have it ready calibrated. You have to calibrate it from scratch every time, so I deducted one star for that. Also, for the price, it wouldn't be bad if they included a plastic backpack for 2 euros that could fit its styrofoam box.

    Translated from Greek ·
    6
  • !!!!FOR NIKON USERS READ BELOW!!!!

    The most compact gimbal on the market for cameras up to 3 kilograms. Without having used any other gimbal and having had this one in my possession for the last 3 months, I have the following to say.

    It is sturdy in terms of equipment weight. Tested with a camera, lens, and filters weighing 2.2 kilograms, I had the motor set to its medium setting and it worked even on the low setting without any problems.

    It does the job it is intended for and more. Very smooth in videography without any vibrations, even while running (watch videos on YouTube to get a better idea).

    Build quality, perhaps its weak point, but this only applies to the location of the buttons, where it could have been more refined. Otherwise, it has a very sturdy metal construction that seems to withstand the test of time.

    The battery has incredible endurance, even with heavy equipment, it lasts for hours. Speaking for myself, my hands get tired first to the point where I can't handle it anymore, and the battery is still halfway charged.

    Now, the most important part. Compatibility with NIKON DSLRs specifically for d750 and d5200, based on my experience and information found on the internet.
    For video, yes, it functions as a gimbal, but there is absolutely no compatibility (as stated by the company) unless you follow these instructions. By purchasing the additional accessory cmf-04 servo follow focus mechanism for about 100 euros (brand new), you can solve the known focusing issue on all Nikon DSLR cameras except for d850 and d780. And now comes the best part regarding camera control. By connecting your mobile phone and camera with an OTG cable and the Nikon cable, and downloading the amazing qdslrdashboard app (around 10 euros), you have the perfect combination for videography. Your mobile phone becomes an automatic external monitor with all camera controls available, and the best part is the focus peak screen and histogram (if you were to buy them separately, it would cost over 200 euros). Focusing becomes easy with a little practice and the right settings on the gimbal.

    And now let's talk about compatibility for photos. For this specific aspect, I haven't found any references on the internet, and I managed to achieve it through my own experiments. By downloading the official zy play app from Zhiyun and connecting the camera to the gimbal again with an OTG cable, the compatibility becomes complete for fantastic panoramas and timelapse videos.

    Some of the lenses that I managed to balance without any issues with the d750, just to name a few:
    Sigma 14 f2.8
    Sigma 20 f1.8
    Sigma 28 f1.8
    Nikon 35 f2
    Nikon 50 f1.4 non-AIS
    Nikon 60 2.8 micro
    Nikon 85 1.4d
    Nikon 85 f2.8 pc
    Nikon 105 f2.8 micro
    Nikon 135 f2 dc
    Nikon 35-70 f2.8 (be careful with the zoom)
    All of these in combination with large square filters measuring 125mm.

    With the use of counterweights:
    Nikon 28-70 2.8
    Nikon 180 2.8 with limited movement
    Nikon 70-200 2.8 VR with limited movement

    The d5200 required counterweights or a battery grip for some of these lenses.

    UPDATE 19/6/2021
    After 1 year of use, I will add a few more comments about this stabilizer.
    For those considering ease of use, yes, the gimbal takes quite some time to set up. Personally, it takes me 10 to 15 minutes to prepare it for videography, including setting up the follow focus, which takes about 5-7 minutes on its own.

    Zhiyun continues to support with updates and there are video reviews for each one separately by Peter Makholm on YouTube. Keep the firmware files stored on your computer because Zhiyun does not have an archive for older ones if needed, but you can find them on Peter Makholm's website with a small donation.

    If you need to prepare it before shooting, it cannot be stored in its box but can be stored in another case without any problem. Simply remove the camera from the front button (release button), put all the arms in the storage position, and lock them with the red buttons (locks). Then, when you open it again, it will be ready and balanced.

    The gimbal performs better in stability with an extra grip or even better with two if you don't use the central control buttons. It doesn't have to be the original one, there are various options available in the market.

    The screws provided in the package to attach the camera to the base are difficult to use and require a screwdriver or a coin to tighten. Replace them with 1/4'' d-ring screws (google it)

    Translated from Greek ·
    66
  • See all
289,00 €
Free   shipping cost