• Steel thickness: 1.25mm
• Test pressure: 13 bar
• Operating pressure: 10 bar
• Color RAL 9010 white, baked at 190°C
• Heating outputs are based on a room temperature of 20°C according to DIN 4704

In the external loop heating panels, the switch is inserted with one side of the body and has an external tube that connects the top to the bottom of the radiator.

The column type is denoted by the number 33 (three-column), which means it has 3 water-bearing columns and 3 meanders welded to increase the heated surface area.

The total body thickness is 15.5 cm.

It is very important to make the right choice of radiator depending on the dimensions of your space. The sizing of the radiators should be done by an engineer after studying the space and calculating losses. Incorrect selection of the radiator can lead to insufficient heating or excessive heating of the space, resulting in energy waste.

A practical and simple way to calculate the required calories yourself is to multiply the height, width, and length of your room in meters. Then, multiply the result by the number 50, which approximately represents the possible losses.

However, be careful, this calculation method is indicative and does not replace the study that an engineer will conduct, which will be absolutely accurate.