Fuel & Oil Additives

Wynn's Turbo Cleaner Fuel System Cleaner Additive For Car 200ml Code: 1831075

  • Cleans and unblocks dirty turbochargers
  • The foam it produces has a long-lasting cleaning effect on the turbine surface
  • Restores the turbo engine's power to its original activity
  • Cleans and unblocks dirty turbochargers
  • The foam it produces has a long-lasting cleaning effect on the turbine surface
  • Restores the turbo engine's power to its original activity
See full description See full description
  • Compatible Engine Petrol, Petroleum
  • See all
19 00

-5% for 3+ products

19 Coins 19 Coins
Delivery Wed, 29 Jul - Fri, 31 Jul
5,00 € shipping cost
Sent from Greece
Add at least 3 of the same or different products from the offer and get -5% on every product!

Offer's products

From Overneed 5.0 (3)
Greece
3 pieces
See Car Consumables on the page of Overneed
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Description

Description

  • Cleans and unblocks dirty turbochargers
  • The foam it produces has a long-lasting cleaning effect on the turbine surface
  • Restores the turbo engine's power to its original activity

Manufacturer

See full description

Specifications

Specifications

Product Number
1831075
Type
Fuel System Cleaner
Compatible Engine
Petrol, Petroleum
Capacity
200 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (3)

Reviews

  1. 1
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1
Review this product
  • psyxiklimatismos
    5
    6 out of 7 members found this review helpful

    You need to read and follow the procedure correctly in order to avoid causing problems to the engine.
    Start the engine and let it warm up. Remove the flexible hose in the intake system, located between the air filter box and the turbocharger/intercooler. For gasoline engines, run the engine up to 2000 RPM. For diesel engines, leave the engine in idle mode, NEVER with the gas pedal pressed. With a warm engine, spray the product on the inlet side of the turbocharger. Spray the Wynn Turbo Cleaner in short intervals to avoid sudden increases in RPM and engine knocking. After each spray, wait for the RPM to return to the initial level. Continue until the entire 200 ml aerosol product is used. Let the engine idle for a few minutes. Stop the engine. Reconnect the flexible air intake hose. Start the engine, rev it 5 to 10 times (maximum speed 3000 RPM) or drive 5 to 10 km with the car (do not exceed 3000 RPM). Let the engine run for at least one minute before stopping

    Translated from Greek ·
    Did you find this review helpful?
  • Miltos_Kampouris
    1
    7 out of 8 members found this review helpful

    Very bad experience, clear usage instructions are not stated on the packaging, and neither could the official representative (service department) provide instructions (as it enters the air intake). The result was to destroy the engine.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • You need to read and follow the procedure correctly in order to avoid causing problems to the engine.
    Start the engine and let it warm up. Remove the flexible hose in the intake system, located between the air filter box and the turbocharger/intercooler. For gasoline engines, run the engine up to 2000 RPM. For diesel engines, leave the engine in idle mode, NEVER with the gas pedal pressed. With a warm engine, spray the product on the inlet side of the turbocharger. Spray the Wynn Turbo Cleaner in short intervals to avoid sudden increases in RPM and engine knocking. After each spray, wait for the RPM to return to the initial level. Continue until the entire 200 ml aerosol product is used. Let the engine idle for a few minutes. Stop the engine. Reconnect the flexible air intake hose. Start the engine, rev it 5 to 10 times (maximum speed 3000 RPM) or drive 5 to 10 km with the car (do not exceed 3000 RPM). Let the engine run for at least one minute before stopping

    Translated from Greek ·
    6
  • Very bad experience, clear usage instructions are not stated on the packaging, and neither could the official representative (service department) provide instructions (as it enters the air intake). The result was to destroy the engine.

    Translated from Greek ·
    7
  • 0
  • See all
Questions (1)

Questions

22 users have this product and can help you

Ask for the product
petros_g80
See all questions (1)

Description & Specifications

  • Cleans and unblocks dirty turbochargers
  • The foam it produces has a long-lasting cleaning effect on the turbine surface
  • Restores the turbo engine's power to its original activity

Manufacturer

Product Number
1831075
Type
Fuel System Cleaner
Compatible Engine
Petrol, Petroleum
Capacity
200 ml

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

  1. 1
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1
Review this product
  • psyxiklimatismos
    5
    6 out of 7 members found this review helpful

    You need to read and follow the procedure correctly in order to avoid causing problems to the engine.
    Start the engine and let it warm up. Remove the flexible hose in the intake system, located between the air filter box and the turbocharger/intercooler. For gasoline engines, run the engine up to 2000 RPM. For diesel engines, leave the engine in idle mode, NEVER with the gas pedal pressed. With a warm engine, spray the product on the inlet side of the turbocharger. Spray the Wynn Turbo Cleaner in short intervals to avoid sudden increases in RPM and engine knocking. After each spray, wait for the RPM to return to the initial level. Continue until the entire 200 ml aerosol product is used. Let the engine idle for a few minutes. Stop the engine. Reconnect the flexible air intake hose. Start the engine, rev it 5 to 10 times (maximum speed 3000 RPM) or drive 5 to 10 km with the car (do not exceed 3000 RPM). Let the engine run for at least one minute before stopping

    Translated from Greek ·
    Did you find this review helpful?
  • Miltos_Kampouris
    1
    7 out of 8 members found this review helpful

    Very bad experience, clear usage instructions are not stated on the packaging, and neither could the official representative (service department) provide instructions (as it enters the air intake). The result was to destroy the engine.

    Translated from Greek ·
    Did you find this review helpful?
  • Verified purchase

  • You need to read and follow the procedure correctly in order to avoid causing problems to the engine.
    Start the engine and let it warm up. Remove the flexible hose in the intake system, located between the air filter box and the turbocharger/intercooler. For gasoline engines, run the engine up to 2000 RPM. For diesel engines, leave the engine in idle mode, NEVER with the gas pedal pressed. With a warm engine, spray the product on the inlet side of the turbocharger. Spray the Wynn Turbo Cleaner in short intervals to avoid sudden increases in RPM and engine knocking. After each spray, wait for the RPM to return to the initial level. Continue until the entire 200 ml aerosol product is used. Let the engine idle for a few minutes. Stop the engine. Reconnect the flexible air intake hose. Start the engine, rev it 5 to 10 times (maximum speed 3000 RPM) or drive 5 to 10 km with the car (do not exceed 3000 RPM). Let the engine run for at least one minute before stopping

    Translated from Greek ·
    6
  • Very bad experience, clear usage instructions are not stated on the packaging, and neither could the official representative (service department) provide instructions (as it enters the air intake). The result was to destroy the engine.

    Translated from Greek ·
    7
  • 0
  • See all
19,00 €
5,00 €   shipping cost