Skroutz.cy

FFG CWSP 1000MS Single-Phase Rainwater Well Pump 1.4hp with Float Switch 43482
Submersible Water Pumps

FFG CWSP 1000MS Single-Phase Rainwater Well Pump 1.4hp with Float Switch 43482

Key features:

  • Maximum submersion depth: 7m
  • Outlet: 1˝
  • Flow rate: 6800 Lit/h
  • Maximum temperature: 35 °C
  • Cable length: 10m
See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    40

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
122 00 €
122 Coins 122 Coins
Delivery Wed, 30 Sep - Fri, 02 Oct
16,00 € shipping cost
Do you want it with 11,00 € shipping?
Sent from Greece
From Aggeloy 4.7 (7)
4.7 (7 reviews)
Greece
1 piece
See Water Pumps on the page of Aggeloy
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Features

  • Multistage submersible automatic pump with float, suitable for draining rainwater from cellars or tanks.
  • The 4-stage plastic impellers can reach a maximum pumping height of 40m. 
  • Induction motor, SiC sealing gasket, and INOX shaft for extended lifespan.
  • Stainless steel shaft
  • Suitable for draining rainwater from cellars or tanks and ideal for wells

Technical Specifications

  • Maximum submersion depth: 7m
  • Outlet: 1˝
  • Flow rate: 6800 Lit/h
  • Maximum temperature: 35 °C
  • Cable length: 10m
  • Power: 1,000W
  • Head: 40m
  • Max grain size: 5mm
  • Weight: 9.5kg
  • Protection type: IPX8


    Performance

    • At 10m: Cubic 5.5 m³/h 
    • At 15m: Cubic 5.0 m³/h 
    • At 25m: Cubic 4.1 m³/h 
    • At 35m: Cubic 2.3 m³/h

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Dimensions

    Type
    Rainwater, Well

    Type

    Well
    They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
    Power Source
    Electric

    Power Source

    Electric
    The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
    Voltage
    Single-Phase

    Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
    Horsepower
    1.4 hp

    Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
    Power
    1050 W

    Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
    Cable Length
    10 m

    Features

    Electronic Level Sensor
    No

    Electronic Level Sensor

    It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
    with Cutter Impeller
    No

    with Cutter Impeller

    Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
    Float switch
    Yes

    Float switch

    It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
    Outlet Nozzle
    1"

    Outlet Nozzle

    The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
    Vortex
    No

    Vortex

    The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

    Pumping Specifications

    Maximum Head Height
    40 m

    Maximum Head Height: 40


    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
    Maximum Output
    6.5 m³/h

    Maximum Output

    The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
    Pump Submersion Depth
    7 m
    Maximum Particle Size
    1 mm

    Maximum Particle Size

    Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
    Shallow Suction
    No

    Shallow Suction

    This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

    Materials & Construction

    Set
    No
    Stainless
    Yes
    Protection Certification
    IPX8

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications
    Questions (1)

    Questions

    8 users have this product and can help you

    Ask for the product
    rune

    Ποια είναι η διάμετρος του περιβλήματος της αντλίας;

    rune 2026-02-06
    0 Replies Reply to
    See all questions (1)

    Description & Specifications

    Features

    • Multistage submersible automatic pump with float, suitable for draining rainwater from cellars or tanks.
    • The 4-stage plastic impellers can reach a maximum pumping height of 40m. 
    • Induction motor, SiC sealing gasket, and INOX shaft for extended lifespan.
    • Stainless steel shaft
    • Suitable for draining rainwater from cellars or tanks and ideal for wells

    Technical Specifications

    • Maximum submersion depth: 7m
    • Outlet: 1˝
    • Flow rate: 6800 Lit/h
    • Maximum temperature: 35 °C
    • Cable length: 10m
    • Power: 1,000W
    • Head: 40m
    • Max grain size: 5mm
    • Weight: 9.5kg
    • Protection type: IPX8


      Performance

      • At 10m: Cubic 5.5 m³/h 
      • At 15m: Cubic 5.0 m³/h 
      • At 25m: Cubic 4.1 m³/h 
      • At 35m: Cubic 2.3 m³/h

      Manufacturer

      Manufacturer Details

      Warnings & Safety Information

      Dimensions

      Type
      Rainwater, Well

      Type

      Well
      They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
      Power Source
      Electric

      Power Source

      Electric
      The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
      Voltage
      Single-Phase

      Voltage

      Single-Phase

      Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
      Horsepower
      1.4 hp

      Horsepower

      Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
      Power
      1050 W

      Power

      It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
      Cable Length
      10 m

      Features

      Electronic Level Sensor
      No

      Electronic Level Sensor

      It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
      with Cutter Impeller
      No

      with Cutter Impeller

      Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
      Float switch
      Yes

      Float switch

      It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
      Outlet Nozzle
      1"

      Outlet Nozzle

      The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
      Vortex
      No

      Vortex

      The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

      Pumping Specifications

      Maximum Head Height
      40 m

      Maximum Head Height: 40


      The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

      • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
      • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
      Maximum Output
      6.5 m³/h

      Maximum Output

      The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
      Pump Submersion Depth
      7 m
      Maximum Particle Size
      1 mm

      Maximum Particle Size

      Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
      Shallow Suction
      No

      Shallow Suction

      This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

      Materials & Construction

      Set
      No
      Stainless
      Yes
      Protection Certification
      IPX8

      Important information

      Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

      122,00 €
      16,00 €  

      Reduced Shipping

      For purchases from Skroutz a discount is applied for this particular product.

      Learn more