Skroutz.cy

Wilo TWI 5 505 FS Single-phase Pump Drilling 1.2hp 4144941
Submersible Water Pumps

Wilo TWI 5 505 FS Single-phase Pump Drilling 1.2hp 4144941

Functional Features

  • Maximum manometric head Hmax: 56.5 m
  • Pipe connection on the discharge: Rp 1
  • Maximum operating pressure: 10.0 bar
  • Maximum sand content: 50 g/m³
  • Motor protection degree: IP68
  • ...

Functional Features

  • Maximum manometric head Hmax: 56.5 m
  • Pipe connection on the discharge: Rp 1
  • Maximum operating pressure: 10.0 bar
  • Maximum sand content: 50 g/m³
  • Motor protection degree: IP68
  • Maximum submersion height: 17 m
  • Minimum fluid temperature: 5 °C
  • Maximum fluid temperature: 40 °C
  • Net weight: 18.3 kg
  • Maximum diameter: 129 mm

Motor Details

  • Motor...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
815 00 €
815 Coins 815 Coins
Delivery Wed, 19 Aug - Fri, 21 Aug
48,00 € shipping cost
Do you want it with 43,00 € shipping?
Sent from Greece
From Lamas
Greece
2 pieces
See Water Pumps on the page of Lamas
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Functional Features

  • Maximum manometric head Hmax: 56.5 m
  • Pipe connection on the discharge: Rp 1¼
  • Maximum operating pressure: 10.0 bar
  • Maximum sand content: 50 g/m³
  • Motor protection degree: IP68
  • Maximum submersion height: 17 m
  • Minimum fluid temperature: 5 °C
  • Maximum fluid temperature: 40 °C
  • Net weight: 18.3 kg
  • Maximum diameter: 129 mm

Motor Details

  • Motor construction type: Submersible motor
  • Electrical connection: 1~230 V, 50 Hz
  • Rated power: 0.9 kW
  • Rated speed: 2810 1/min
  • Rated current: 6.5 A
  • Starting method: Direct Online (DOL)
  • Maximum start frequency: 40 1/h
  • Motor diameter: 127 mm

Cable

  • Connection cable length: 20 m
  • Cable cross-section: 4G1 mm²

Materials

  • Pump casing: Stainless steel
  • Motor material: Stainless steel
  • shaft: Stainless steel
  • Impeller: Stainless steel

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Pump Submersion Depth
17 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

Functional Features

  • Maximum manometric head Hmax: 56.5 m
  • Pipe connection on the discharge: Rp 1¼
  • Maximum operating pressure: 10.0 bar
  • Maximum sand content: 50 g/m³
  • Motor protection degree: IP68
  • Maximum submersion height: 17 m
  • Minimum fluid temperature: 5 °C
  • Maximum fluid temperature: 40 °C
  • Net weight: 18.3 kg
  • Maximum diameter: 129 mm

Motor Details

  • Motor construction type: Submersible motor
  • Electrical connection: 1~230 V, 50 Hz
  • Rated power: 0.9 kW
  • Rated speed: 2810 1/min
  • Rated current: 6.5 A
  • Starting method: Direct Online (DOL)
  • Maximum start frequency: 40 1/h
  • Motor diameter: 127 mm

Cable

  • Connection cable length: 20 m
  • Cable cross-section: 4G1 mm²

Materials

  • Pump casing: Stainless steel
  • Motor material: Stainless steel
  • shaft: Stainless steel
  • Impeller: Stainless steel

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.2 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
900 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Pump Submersion Depth
17 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

815,00 €
48,00 € 53,00 €   shipping cost
10€ coupon from the shop Sugarfree until 09/08!
10€ coupon from the shop Sugarfree until 09/08!
See more