Code: 731919

Diamond disc Φ230 from Mtx suitable for cutting ceramics and concrete. It offers high cutting speed and absolute accuracy.

To ensure the safest and most economical use, the following should be followed:

• Before use:
• The diameter of the hole and the shaft of the machine must be equal.
• The flanges and shaft must be free of damage and clean.
• The flanges must have equal diameters.
• The directional arrow on the disc blade must align with the rotation of the machine.
• During operation:
• Never work without protective eyewear.
• Apply light pressure during cutting.
• The cutting speed decreases with excessive pressure.
• Heat generated during operation can cause damage, blockage, and destruction of the blade.
• To lower the blade temperature, occasionally raise the blade.
• Use the blade only for straight cuts.
• Avoid working the blade at an angle.
• If the blade shines or its cutting capacity decreases, you can sharpen it by cutting some abrasive material like sandpaper.
• After changing blades, ensure that the arrow on the blade rotates in the correct direction.
• Never exceed the maximum rotation speed indicated on the product.

Diameter: 230mm

Shaft diameter: 22.22mm

Maximum rotation speed: 80m/s - 6,640rpm

Packaging: Piece in blister

Manufacturer: Mtx