The Fast Evo series meets the highest demands with new products based on innovative technology (electronic temperature control) to give you maximum comfort. All the water you want at the temperature you set.

Thanks to the NTC sensor, the water temperature will be stable and you can adjust it between 35 and 65° C. The Fast Evo X will automatically adjust the burner according to the required water flow.

The ignition of the Fast Evo X will occur via a flow sensor. This allows ignition up to the critical point of 0.1 bar.

It is central and can be used either as the main option for heating the water in your home or as a supplementary one. It can provide hot water throughout the house for your daily needs, as long as there are appropriate pipes for the distribution of hot water. This may potentially result in heat and energy losses due to the distance.

It is equipped with a built-in digital display that shows you the water temperature and also allows you to select it yourself.

The temperature is easily adjustable thanks to the external regulator. 

The instant water heater is a type of water heater that heats water in real time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water being used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the resistance and other components.

It operates with liquefied petroleum gas (LPG), and no electrical installation is required.

The instant water heater has a cold water inlet pipe, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is that the pressure of the incoming cold water should not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature that can be reached for hot water production is 65 °C, while the maximum water flow rate reaches up to 11 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• It is small in size and doesn't take up much space.
• There are no energy losses, as only the water being used is heated at that moment. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used is wasted.
• The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we save water as well as electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water runs in a few seconds. A traditional water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.