- Class D
- Channels: 3
- Maximum power @ 12.6 VDC: 800W RMS CH1/CH2 (2 x 200W RMS) 1OHM, CH3 (1 x 400W RMS) 2OHMS
- Input sensitivity: 250mV
- Signal-to-noise ratio: >88dB
- Frequency response: CH1/CH2 100Hz ~ 25KHz
- 10Hz ~ 100Hz (LPF = 100Hz)
- CH3 10Hz ~ 700Hz (LPF = 700Hz)
- 10Hz ~ 25KHz (LPF = OFF)
- High pass crossover (HPF): (CH1 / CH2) 100Hz (-12dB/8ª)
- Low pass crossover (LPF): (CH3) 100Hz, 700Hz, OFF (-12dB/8ª)
- Idle power consumption: 1.0A
- Maximum music consumption: 51A
- Maximum consumption with sine wave signal: 102A
- Dimensions (W x H x D): 173 x 52 x 227mm
- Weight: 1.43 kg
The DS 800X3 amplifier has been developed with the highest technology and performance for car audio systems.
It has a maximum power of 800 Watt RMS with a complex impedance of 1 and 2 OHMS, and 3 channels: two of 200W RMS and one of 400W RMS.
Finally, it is full range, playing all frequencies at the right size.
- Class D
- Channels: 3
- Maximum power @ 12.6 VDC: 800W RMS CH1/CH2 (2 x 200W RMS) 1OHM, CH3 (1 x 400W RMS) 2OHMS
- Input sensitivity: 250mV
- Signal-to-noise ratio: >88dB
- Frequency response: CH1/CH2 100Hz ~ 25KHz
- 10Hz ~ 100Hz (LPF = 100Hz)
- CH3 10Hz ~ 700Hz (LPF = 700Hz)
- 10Hz ~ 25KHz (LPF = OFF)
- High pass crossover (HPF): (CH1 / CH2) 100Hz (-12dB/8ª)
- Low pass crossover (LPF): (CH3) 100Hz, 700Hz, OFF (-12dB/8ª)
- Idle power consumption: 1.0A
- Maximum music consumption: 51A
- Maximum consumption with sine wave signal: 102A
- Dimensions (W x H x D): 173 x 52 x 227mm
- Weight: 1.43 kg
- Product Number
- 800X3
- Number of Channels
- 3 Channels
- Output Power (4 Ohm)
- 400 watt / channel
- Output Power (2 Ohm)
- 400 watt / channel
- Amplifier class
- D
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.