Skroutz.cy

Inca Lux Glass X A70 Ventilation Mechanism 70cm Black
Vent Hoods

Inca Lux Glass X A70 Ventilation Mechanism 70cm Black Code: 110.0356.558

The Faber Inca Lux Glass X A70 cooker hood insert is built into the cooking area and uses perimeter extraction to remove odours and steam. Its maximum extraction rate is 710 m³/h, and it can operate...

The Faber Inca Lux Glass X A70 cooker hood insert is built into the cooking area and uses perimeter extraction to remove odours and steam. Its maximum extraction rate is 710 m³/h, and it can operate in extraction or recirculation mode.

It features four speed settings and metal filters, and can optionally be fitted with an activated carbon filter for...

See full description See full description

Top specs

  • Item

    Absorption Mechanism

    "They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."

  • Noise Level

    Shows how much noise the extractor makes when it is in operation.

    2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

  • Energy class

    The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

    2. The higher the energy class, the lower the electricity consumption.

    3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.

  • Extraction Power (Max)

    Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


    For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

  • Filter Type

    Charcoal (optional)

    Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


    They are not washable and it is recommended to replace them every 4 months.


    Their use reduces the efficiency of the range hood by about 30%.

    Metal

    They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
  • See all
608 83 €
Delivery Wed, 18 Nov - Fri, 20 Nov
59,00 € shipping cost
Delivery Tue, 24 Nov - Mon, 30 Nov
53,00 € shipping cost
Do you want it with 5,00 € shipping discount?
Sent from Greece
From Aporrofitiras.gr
Greece
5+ pieces
See Large Appliances on the page of Aporrofitiras.gr

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing

  • Extended warranty

    Mechanical or electrical failure of a component necessary for the device's operation/safe use - the same failures already covered by the original manufacturer's warranty, simply extending it by 1 year.

    • Valid for 3 more years
    • With the reliability of Allianz Partners
    Learn more
You can select additional services after adding the product to the cart.
Review the product
Product report

Description

Description

The Faber Inca Lux Glass X A70 cooker hood insert is built into the cooking area and uses perimeter extraction to remove odours and steam. Its maximum extraction rate is 710 m³/h, and it can operate in extraction or recirculation mode.

It features four speed settings and metal filters, and can optionally be fitted with an activated carbon filter for recirculation without venting air outdoors.

  • Type: Cooker hood insert
  • Width: 70 cm
  • Colour: Black
  • Maximum extraction rate: 710 m³/h
  • Speed settings: 4
  • Airflow mode: Extraction or recirculation
  • Filters: Metal, with the option to use activated carbon filters
  • Noise level: 68 dB
  • Energy efficiency class: B
  • Fluid dynamic efficiency: B
  • Lighting efficiency: A
  • Grease filtering efficiency: D
  • Average annual energy consumption: 84 kWh/y
  • Dimensions (H × W × D): 33 × 70 × 30 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
110.0356.558

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
-
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
-
Colour
Black

Technical Features

Extraction Power (Max)
710 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
70 cm

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
84 kWh/y
Extraction Flow Efficiency
B

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
68 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Smart Features

Connectivity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Faber Inca Lux Glass X A70 cooker hood insert is built into the cooking area and uses perimeter extraction to remove odours and steam. Its maximum extraction rate is 710 m³/h, and it can operate in extraction or recirculation mode.

It features four speed settings and metal filters, and can optionally be fitted with an activated carbon filter for recirculation without venting air outdoors.

  • Type: Cooker hood insert
  • Width: 70 cm
  • Colour: Black
  • Maximum extraction rate: 710 m³/h
  • Speed settings: 4
  • Airflow mode: Extraction or recirculation
  • Filters: Metal, with the option to use activated carbon filters
  • Noise level: 68 dB
  • Energy efficiency class: B
  • Fluid dynamic efficiency: B
  • Lighting efficiency: A
  • Grease filtering efficiency: D
  • Average annual energy consumption: 84 kWh/y
  • Dimensions (H × W × D): 33 × 70 × 30 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
110.0356.558

Product Details

Type
Absorption Mechanism

Type

Absorption Mechanism
"They are built-in hoods that are installed in cabinets and only the bottom surface of the hood is visible, additionally they do not have sliding filters."
Retro
No
Grease Filter Material
Charcoal (optional), Metal

Grease Filter Material

Charcoal (optional)

Carbon filters are used when range hoods operate without a duct connection and the air is recirculated into the room.


They are not washable and it is recommended to replace them every 4 months.


Their use reduces the efficiency of the range hood by about 30%.

Metal

They are used in most extractors. Metallic filters are easy to remove and clean, either in the dishwasher or by hand. They do not require frequent replacement.
Extraction Mode
Extraction or Recirculation

Extraction Mode

Concerns the way in which the extractor absorbs air.

Extraction or Recirculation

The extractor fan has both functions. The air that the extractor fan draws can either be extracted through a pipe or recycled back into the fan. For air extraction function, a pipe is needed to remove the air outside the kitchen.
Dual Motor
No
Type of Control
-
Timer Function
No
Filter Cleaning Indicator
No
Washable Filter
-
Colour
Black

Technical Features

Extraction Power (Max)
710 m³/h

Extraction Power (Max)

Displays the maximum absorption capacity. To calculate the required absorbency, knowledge of the dimensions of the kitchen space is necessary.


For example, for a 7 sqm kitchen, the required absorption power is approximately 200m³/h, for 12 sqm it is approximately 340m³/h, and for 15 sqm it is 420m³/h and above.

Dimensions

Width
70 cm

Energy Label

Energy Class
B

Energy Class

The energy class categorizes devices into groups according to the current they consume, ranging from the lowest D to the highest A+++.

2. The higher the energy class, the lower the electricity consumption.

3. For example, for a 12 sq.m. kitchen with an extractor fan that has an absorption power of about 340m³/h and frequent weekly use, the difference in annual cost from D to A is about €6, and from A to A+++ the difference is almost negligible.
Average Energy Consumption per Year
84 kWh/y
Extraction Flow Efficiency
B

Extraction Flow Efficiency

Expresses how effective the extractor is in absorbing odors. 2. The performance scale starts at G for less efficient extractors and goes up to A for more efficient ones. 3. Typically, a rating of D and above is a good performance for effectively absorbing odors from cooking.
Lighting Efficiency
A

Lighting Efficiency

Expresses the intensity of the hood's lighting. The scale starts from G for the lowest performance where the lighting is quite soft, up to A for the highest performance where the lighting is more intense. It is usually recommended to have a lighting performance index of C or higher to facilitate cooking with more intense lighting.
Fat Retention Efficiency
D

Fat Retention Efficiency

Shows how effectively the filters of the extractor work in retaining fat. 


The scale starts from G for the lowest performance, up to A for the highest performance. 


A performance rating of C and above is considered satisfactory for fat retention during cooking.
Noise Level
68 dB

Noise Level

Shows how much noise the extractor makes when it is in operation.

2. The fewer the db, the quieter it is. An extractor with 58db or less is considered quite quiet.

Smart Features

Connectivity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

608,83 €
59,00 € 64,00 €   shipping cost

Faber