Gloria Special Acrylic tile adhesive is intended for installing tiles indoors and outdoors on cement screeds, plaster, concrete and foam concrete. It is a white mortar with good workability and adhesion, and is resistant to weather changes, frost and moisture.
Mix with 6–7 litres of clean water per 25 kg package, using a mechanical mixer until a consistent mixture is obtained. Use the prepared mixture within 3–4 hours, stirring occasionally without adding water. Spread only as much as can be worked within 20–25 minutes to prevent a skin from forming. Adhesion and elasticity can optionally be enhanced with GLORIA DHR liquid adhesive or GLORIA DMG bonding emulsion, up to 10%.
- Type: Tile adhesive
- Quantity: 25 kg
- Colour: White
- Application area: Indoors and outdoors
- Suitable surfaces: Cement screeds, plaster, concrete and foam concrete
- Water per package: 6–7 litres
- Pot life: 3–4 hours
- Working time: 20–25 minutes
- Open time: 30–40 minutes
- Adjustment time: 50 minutes
- Grouting: After 24 hours on floors and 12 hours on walls
- Consumption: 4–5 kg/m², depending on the surface and tile size
- Application temperature: From +5 °C to +35 °C
- Resistance: Frost and moisture resistant
- Ageing resistance: Excellent
- Product Number
- 020025G
- Type
- Tiles
- Quantity
- 25 kg
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.