Skroutz.cy

Wilo TWI 5-304FS Single-phase Pump Drilling 0.75hp 4144935
Submersible Water Pumps

Wilo TWI 5-304FS Single-phase Pump Drilling 0.75hp 4144935

Operating characteristics

  • Max head Hmax 44.4 m
  • Pipe connection on the discharge Rp 1
  • Max operating pressure p 10.0 bar
  • Max sand content 50 g/m³
  • Motor protection class IP68
  • Max immersion depth 17 m
  • ...

Operating characteristics

  • Max head Hmax 44.4 m
  • Pipe connection on the discharge Rp 1
  • Max operating pressure p 10.0 bar
  • Max sand content 50 g/m³
  • Motor protection class IP68
  • Max immersion depth 17 m
  • Min liquid temperature Tmin 5 °C
  • Max liquid temperature Tmax 40 °C
  • Net weight approx. m 15.3 kg
  • Max diameter Dmax 129 mm

Motor characteristics

  • Motor...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    45

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
695 00 €
695 Coins 695 Coins
Delivery Tue, 25 Aug - Mon, 31 Aug
35,00 € shipping cost
Do you want it with 30,00 € shipping?
Sent from Greece
From Lamas
Greece
2 pieces
See Water Pumps on the page of Lamas
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Operating characteristics

  • Max head Hmax 44.4 m
  • Pipe connection on the discharge Rp 1¼
  • Max operating pressure p 10.0 bar
  • Max sand content 50 g/m³
  • Motor protection class IP68
  • Max immersion depth 17 m
  • Min liquid temperature Tmin 5 °C
  • Max liquid temperature Tmax 40 °C
  • Net weight approx. m 15.3 kg
  • Max diameter Dmax 129 mm

Motor characteristics

  • Motor construction type Submersible motor
  • Electrical connection 1~230 V, 50 Hz
  • Rated power P2 0.55 kW
  • Rated speed n 2810 1/min
  • Rated current IN 4.5 A
  • Starting method Direct Online (DOL)
  • Max frequency of starts t 40 1/h
  • Motor diameter DM 127 mm

Cable

  • Connection cable length 20 m
  • Cable cross-section 4G1 mm²

Materials

  • Pump housing Stainless steel
  • Motor material Stainless steel
  • Shaft Stainless steel
  • Impeller Stainless steel

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
45 m

Maximum Head Height: 45


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

Operating characteristics

  • Max head Hmax 44.4 m
  • Pipe connection on the discharge Rp 1¼
  • Max operating pressure p 10.0 bar
  • Max sand content 50 g/m³
  • Motor protection class IP68
  • Max immersion depth 17 m
  • Min liquid temperature Tmin 5 °C
  • Max liquid temperature Tmax 40 °C
  • Net weight approx. m 15.3 kg
  • Max diameter Dmax 129 mm

Motor characteristics

  • Motor construction type Submersible motor
  • Electrical connection 1~230 V, 50 Hz
  • Rated power P2 0.55 kW
  • Rated speed n 2810 1/min
  • Rated current IN 4.5 A
  • Starting method Direct Online (DOL)
  • Max frequency of starts t 40 1/h
  • Motor diameter DM 127 mm

Cable

  • Connection cable length 20 m
  • Cable cross-section 4G1 mm²

Materials

  • Pump housing Stainless steel
  • Motor material Stainless steel
  • Shaft Stainless steel
  • Impeller Stainless steel

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
20 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
45 m

Maximum Head Height: 45


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

695,00 €
35,00 € 40,00 €   shipping cost