Internal puller from Germany suitable for particularly narrow ball bearings, rings, sleeves, and Simmering seals.

Operating method:

• Insert the internal puller inside the bearing and screw the threaded shaft.
• The sharp edges of the shell segments are pressed behind the part that needs to be removed.
• Then, attach the reinforcement support braces.
• Align both legs parallel to the threaded shaft to create a rigid unit.

It can be used either with an impact puller or with the reinforcement support braces.

Capacity: 5-8mm

Screw: M10

For bridge: 1.36/1

For impact puller: 1.35/1