K2 T6 Klinet cleaning liquid degreases painted surfaces before applying wax or protective sealant, while removing polish residue from paintwork and windows. It helps assess the paintwork’s true condition and prepares the surface for polishing or waxing. It is ready to use and can be applied by spraying. For old or thick residue, it can be diluted with water at a ratio of up to 1:1.
After application, leave it to work for 1–2 minutes without allowing it to dry completely, then wipe with a microfiber cloth or polishing pad. Rinse the surface with water or wipe it with a damp cloth, then dry with a clean cloth. Use only in a well-ventilated area.
- Type: Liquid
- Use: Cleaning and degreasing
- Car part: Bodywork
- Capacity: 770 ml
- Suitable surfaces: Painted, rubber, glass, and plastic
- pH: 7–8
- Density: 1.00–1.02 g/cm³
- Composition: Low-foaming detergents and surfactants
- Dilution: Up to 1:1 with water for old or thick residue
- Working time: 1–2 minutes
- Coverage: Approximately 20–25 m² per bottle
- Packaging: Bottle with spray nozzle and safety lock
Specifications
- Usage
- Cleaning
- Type
- Liquid
- Car Part
- Body
Quantity
- Capacity
- 770 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.