μετα απο ενα bluescreen, σταματησε να αναγνωριζει το λογισμικο, και βγαζει ενδειξη po: satafirm s11.
χαιρετησε ή εχει ελπιδες;
What to watch out for
- I write my questions about the product.
- I avoid questions about the availability, price and course of my order.
- I protect my personal information and do not publish it.
- I do not use obscene or offensive expressions.
See in detail the terms of use for the Product Questions
All questions![mplimpliki]()
![Username]()
![Galanoleukos]()
1 Reply
Καμία ελπίδα... Ανάκτηση αρχείων στην καλύτερη. Ομοιοπαθής
2 Comments
ΣΩΖΕΤΑΙ ΔΕΣ ΕΔΩ ΕΝΑ ΒΙΝΤΕΟ :https://www.youtube.com/watch?v=bgy6VNC9fcw
I also took this SATAFIRM S11 BO with Kingston SA400S37. I had that in two at once, one 120gb and another 240gb. In both I tried to use the programs that are available on the sites mentioned by members above, I tried all the way ... It didn't work ... I managed to solve it as follows ...
Note: It is recommended to do the procedure on windows installed in AHCI mode! You MUST perform the procedure with the SSD plugged into a SATA connection, in USB mode it will not work!
1 - Download these two files, one of the files has all the firmware available on the usbdev website, the other file is a program to generate the executable that will make the update:
* s11-flasher - http://vlo.name:3000/tmph/s11-flasher.rar
* firmware_ps3111 - http://http//www.usbdev.ru/?wpfb_dl=6583
2 - Extract the folders.
3 - Inside the "firmware_ps3111" folder, search for the firmware corresponding to your SSD or the closest one you have, copy this file and paste it in the "s11-flasher" folder, then you must rename the firmware to (fw.BIN). [for example if the label on the SSD reads "SBFK71B1", then the firmware that you must pick is "SBFK71F1"]
4 - Run "s11-flasher2-micron.cmd" WIHTOUT administrator privileges: it will generate the executable fw.exe.
5 - You can connect the SSD directly inside the Laptop, perhaps through the CD bay or another SATA free interface. It is not recommended to try Hirens Boot but you can try; remember that AHCI must be enabled in the BIOS. It is also strongly not recommended to use SATA to USB adaptors because the procedure may fail: use a SATA interface.
6 - Run the file fw.exe (this one WITH administrator privileges) and it will write the firmware on the SSD, so you have to select the device that is marked as SATAFIRM S11, click on Upgrade Firmware and wait ... It is recommended before doing this step that all applications are closed and the Antivirus is turned off.
7 - When finished, you must perform a power cycle of the SSD ("disconnect SATA power cable only, not data"), wait 5 seconds and turn it on again (this with the PC turned on), after turning on the SSD, restart the computer to recognize the SSD.
8 - Go to Disk Management, probably opening this part of Computer Management will already ask you to inizialize the disk, click to inizialize it and after that, create the partition in the desired format.
If you need help I did a video trying to explain too:
https://www.youtube.com/watch?v=bgy6VNC9fcw