Skroutz.cy

Εγώ έχω το ST-906w. Η εφαρμογή είναι: Sino Track Pro και το website είναι: http://sinotracking.com/ .
https://content.gps-trace.com/assets/9f6d6b04-4251-4d9e-996d-59019c1db3fe
Απαιτείται προηγουμένως εγγραφή στον server τους: 1. Εγγραφή ID GPS TRACKER στον Sinotracking server. Αποστολή sms στην sim του Gps tracker, με το κείμενο: 8040000 45.112.204.101 8090
2. Μετά την εγγραφή κάνουμε login στον server, ως εξής: User name: (ID συσκευής) και Initial Password: 123456
Ως επιλογή υπηρεσίας tracking server επιέγουμε την 3η επιλογή, (Sinotracking).
By default, a password of 0000 is set for device control (four zeros).
3. Ορισμός APN στην sim. Αποστολή sms στην sim του Gps tracker, με το κείμενο: 8030000(κενό) (Όνομα APN π.χ. internet (για Cosmote)
4. Ενεργοποίηση αριθμών κλήσης για έλεγχο του tracker: μέσω SMS με κείμενο: 003069********0000 1 (πλήρης αριθμός & password (0000) κενό 1).
5. Για να έχω ακρόαση καμπίνας αυτοκινήτου από το μικρόφωνο, στέλνω sms με κείμενο: 66
6. Για Alarm on αλλαγή κατάστασης του διακόπτη εκκίνησης ACC, SMS με κείμενο: 8880000
15. SET TIME ZONE: 8960000E02 (GREECE, east +02 or W05 west +05, India)
16. GPRS MODE: 7100000 , SMS MODE: 7000000
Φαίνεται οτι έχεις: SLEEP MODE:ON. Πρέπει να γίνει ON.
Alarm call to the number tied to the first cell when + 12V appears on the orange ACC wire
Command to enable: 888+PASSWORD
Example: 8880000
Command to disable: 889+PASSWORD
Example: 8890000
Put GPS tracker to sleep mode
When the ignition is turned off and there is no movement after a specified time, the GPS module and outgoing traffic in GSM frequencies are turned off, the device will go into power saving mode. The tracker will wake up when one of the following events occurs: a shaking sensor triggered an incoming call or an SMS message, the ignition on / voltage supply to the orange ACC wire.
Command to enable: SLEEP+PASSWORD+ _ +TIMEINTERVAL (Delay time is indicated in minutes)
Example: SLEEP0000 6
Command to disable: SLEEP+PASSWORD+ _ +0
Example: SLEEP0000 0
If after waking up the shaking has stopped - the device falls asleep again. When the device wakes up from shaking, it does not send anything and you need to set up additional alarms.
Restart tracker
Command: RESTART (There will be a restart of the device and services, all user settings are saved)
Example: RESTART
Reset tracker settings
Command: RESET
Example: RESET
Getting tracker configuration
Command: RCONF
Example: RCONF
SinoTrack website Registration
After all the settings made, our gadget can already be used, but in order to track its location/movement in real time or view the track on the map, you need to register the GPS tracker in one of the relevant services. You can choose to register the resource that you prefer, but we will use the site from the manufacturer - SinoTrack.
SinoTrack Company Website
The site of the company SinoTrack is free for owners of devices of the same name, allows you to connect several trackers to one account and, most importantly, has broad functionality. The only inconvenience is that the site does not have a Russian-language interface, but even basic knowledge of the English language will allow us to understand the basic elements of working with the resource.
Initially, we must write a message or email to SinoTrack itself. The easiest way to do this is to contact the seller from whom you purchased the GPS tracker, if it is the official representative of the manufacturer. The text of the letter is not fundamental, the main thing is to convey the essence, you must ask the representative of the company to create an account for you on the site. At the same time, it is not at all necessary to transfer the ID of your tracker to the employee of the company indicated on the device case. Here is the approximate content of the letter, which will be quite enough:
Good day, dear friend. I purchased the product SinoTrack ST-901 from you. Please register me an account and provide username and password.
In response, usually within 1-2 days you will be sent a login and password to log into your account on the SinoTrak website.
Now we can go to the site (Flash support must be activated in the browser, that is, Adobe Flash Player must be installed), enter the registration data sent to us by the seller in the authorization window, and click the Submit button.
Authorization on Sinotrak website
After logging in to the site, we advise you to change the standard password that was sent to you.
Make it a rule for every time when an account is registered by someone other than you, when you first enter; change your password to your own one that is different from the standard one
To change the password, click on your login in the upper right corner of the browser window and in the opened window in the Password and RePassword fields, enter a new password. The remaining parameters can be changed at your discretion. Then at the bottom of the window click on the button Modify. Password changed.
Change password on SinoTrack website
You can proceed to the main action; namely, add a tracker by ID to your SinoTrack account.
In the top navigation bar, go to the User Center tab, then among the appeared tabs, activate Asset Manage. Under the bookmarks, click the Add, a window for adding a device will open. Required fields are marked with an asterisk:
Asset Name - enter here an arbitrary name of the device, which will be displayed on the website and on the map. If necessary, the field can be edited later;
SimCard No. - Here we enter the phone number by which we refer to the SIM card inserted into the GPS tracker. If necessary, the field can be edited later;
Device ID - here we enter the device ID, the identification number indicated on the tracker case. Please note that you do not need to enter IMEI, a sticker with which can also be found on the case, namely, the numeric code designated as ID. This field will not be edited later. In case of an error, you will have to create a new entry.
At the bottom of the window, press the Ok button. Device added.
Add tracker to Sinotrack website
Now you can track the location of the device and the status of the ignition on sensor (let's talk about connecting the appropriate wire below) in online mode via a browser.
If you wish, you can download the application from the official developer to your mobile device and also work with the tracker on your smartphone.
Connecting GPS tracker SinoTrack ST-901
To connect the tracker for ST-901, 3 wires are removed from the housing:
Black wire - connects to the permanent minus of the car (motorcycle, scooter, and so on), or simply clings to the car body.
Red wire - connects to the car's permanent plus.
Orange wire (ACC) - signal wire plus from the ignition of the car. Connects to the wire/contact on which a plus appears only when the ignition of the car is turned on.
GPS tracker connection scheme. Everything is clear with black and red wires, the orange wire is used for functions related to switching on the ignition, which are described above (for example, an alarm when the ignition is turned on, different timing of signals sent about location on a vehicle and on a jammed one). If you are not interested in these functions, then you may not connect this wire at all, you do not need to connect it together with the red one.
Many are interested in the question of where to install the GPS tracker. There is only one rule: the tracker must be available to receive the GPS satellite signal. That is, it is strongly recommended to position the device so that there are no metal body parts above it. The layer of plastic and glass, in this case, will not prove to be an insurmountable obstacle to the receiving antenna of the tracker. The rest of the installation site is not limited to anything other than your imagination, and the waterproof case allows you to expand this frame and beyond the vehicle.
Control your property and do not get lost

Έχω κάρτα της 1nce και δουλεύει ρολόι αλλά μέσω εφαρμογής sinotrack pro η από το site sinotrack .User name to id kai password το από κάτω νομίζω σωστά έχεις τις παραμέτρους.