Skroutz.cy

Silicon Power Slim S56 SSD 240GB 2.5'' Type With SATA III Connection SP240GBSS3S56B25
SSD Hard Drives

Silicon Power Slim S56 SSD 240GB 2.5'' Type With SATA III Connection SP240GBSS3S56B25

Features

  • Write Speed: 530 MB/s
  • SSD Capacity: 240 GB
  • S.M.A.R.T. Support: Yes
  • SSD Form Factor: 2.5"
  • Native Command Queuing (NCQ): Yes
  • Memory Type: TLC
  • Mean Time Between Failures (MTBF): 1500000 h
  • TRIM...

Features

  • Write Speed: 530 MB/s
  • SSD Capacity: 240 GB
  • S.M.A.R.T. Support: Yes
  • SSD Form Factor: 2.5"
  • Native Command Queuing (NCQ): Yes
  • Memory Type: TLC
  • Mean Time Between Failures (MTBF): 1500000 h
  • TRIM Support: Yes
  • Data Transfer Rate: 6 Gbit/s
  • RAID Support: Yes
  • ECC: Yes
  • Read Speed: 560 MB/s
  • Component for: PC
  • Interface: Serial ATA III

Power Capabilities

  • ...
See full description See full description

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    SATA III

    Modern hard drive connection standard.

    The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.

  • Write Speed

    Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

    For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

  • Read Speed

    Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

    An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
  • See all
56 56 €
57 Coins 57 Coins
Delivery Fri, 17 Jul - Thu, 23 Jul
4,00 € to a Skroutz Point or 5,00 € to an address
Do you want it with Free shipping to Skroutz Point?
Sent from Greece
From Shop13 4.8 (79)
4.8 (79 reviews)
Greece
1 piece
See Hard Drives on the page of Shop13
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Product report

Description

Description

Features

  • Write Speed: 530 MB/s
  • SSD Capacity: 240 GB
  • S.M.A.R.T. Support: Yes
  • SSD Form Factor: 2.5"
  • Native Command Queuing (NCQ): Yes
  • Memory Type: TLC
  • Mean Time Between Failures (MTBF): 1500000 h
  • TRIM Support: Yes
  • Data Transfer Rate: 6 Gbit/s
  • RAID Support: Yes
  • ECC: Yes
  • Read Speed: 560 MB/s
  • Component for: PC
  • Interface: Serial ATA III

Power Capabilities

  • Operating Voltage: 5 V
  • Packaging Weight: 60 g

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
240 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Performance

Read Speed
560 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
530 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (4)

Reviews

4.8
4
4.8
Review this product
  1. 3
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Questions

Questions

Do you have a question about the product?

10 users have this product and can help you

Ask for the product

Description & Specifications

Features

  • Write Speed: 530 MB/s
  • SSD Capacity: 240 GB
  • S.M.A.R.T. Support: Yes
  • SSD Form Factor: 2.5"
  • Native Command Queuing (NCQ): Yes
  • Memory Type: TLC
  • Mean Time Between Failures (MTBF): 1500000 h
  • TRIM Support: Yes
  • Data Transfer Rate: 6 Gbit/s
  • RAID Support: Yes
  • ECC: Yes
  • Read Speed: 560 MB/s
  • Component for: PC
  • Interface: Serial ATA III

Power Capabilities

  • Operating Voltage: 5 V
  • Packaging Weight: 60 g

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
240 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Performance

Read Speed
560 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
530 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (4)

4.8
4
4.8
Review this product
  1. 3
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
56,56 €
4,00 € to a Skroutz Point
or   5,00 €   shipping cost
5€ coupon from the shop Tsimhub until 12/07!
5€ coupon from the shop Tsimhub until 12/07!
See more