Καλησπερα, πηγα να φτιαξω καφε και δεν εβγαλε σταλα νερο (με την συνηθισμενη ποσοτητα καφε που βαζω.) Αφου αφαιρεσα τον καφε και ξανα εβαλα τον μοχλο στη θεση του, παλι δεν εσταζε νερο απο τις τρυπες του μοχλου και μαζευοταν ολο μεσα στον μοχλο. Γνωριζει κανεις τι πρεπει να κανω?
Τι να προσέξω
- Γράφω τις απορίες μου για το προϊόν.
- Αποφεύγω ερωτήσεις για διαθεσιμότητα, τιμή και πορεία της παραγγελίας μου.
- Προστατεύω τα προσωπικά μου στοιχεία και δεν τα δημοσιεύω.
- Δεν χρησιμοποιώ απρεπείς και προσβλητικές εκφράσεις.
Δες αναλυτικά τους όρους χρήσης για τις Ερωτήσεις Προϊόντων
Όλες οι ερωτήσεις![dora_mas]()
![Όνομα χρήστη]()
![andrewison]()
![kvlantis]()
![dora_mas]()
![Christos_Demosthenous1797]()
![Όνομα χρήστη]()
2 Απαντήσεις
(Sorry for late reply, unsure if this helps) If not water is coming thru then the 1st thing is check if water is in the container. 2nd thing I would check , is the water container connected correctly to the device (coffee machine) correctly. Has it slip all the way in. There should be a small click when you put the water tank back on. 3rd I would check , is the water coming thru to the coffee , is the coffee still dry within the portifilter. If it is dry , then it would mean no water is coming from the tank to the coffee . Its essentially a process of elimination. Is it the water, is it the pressue, is it the heater, etc ... When you turn it on (coffee machine) , do the lights, on the 1 cup, 2 cup, steamer work as expected. Sometimes when something like this happens I do a google search or do a youtube search. Can you provide any more details , as in it appears to turn on OK , lights all flash ok , could it be in program/config mode ... any more info and I can feedback and maybe help.
Βάλε μια καρφίτσα στην μικρή τρυπούλα από κάτω από το καλαθάκι να ξεβουλώσει.
2 Σχόλια
Σε ευχαριστω πολυ! Θα το δοκιμασω!
Ξυδι για 15-20 λεπτά να είναι μέσα το καλαθάκι πλάτος και λίγο μέσα
1 Σχόλιο
If your De'Longhi Dedica Espresso Machine is not dispensing water, the first step is to ensure the water tank is properly filled and that the machine is not experiencing a blockage. If the water tank is full, the machine may be experiencing an air blockage or need to be descaled. Here's a more detailed breakdown of troubleshooting steps:
1. Verify Water Tank:
Fill the Water Tank:
Ensure the water tank is filled with fresh, clean water to the maximum level indicated on the tank. Remove and reinsert the tank, pressing lightly to open the valves. Check for Blockages:
If water is not flowing when the machine is running, it could be due to an air blockage. To try and clear the blockage, you can try running the steam nozzle by placing a container under it, pressing the coffee button and then opening the steam dial. Close the dial and press the coffee button again to allow water to flow through the machine, according to a YouTube video. 2. Potential Blockages and Descaling:
Descaling:
If the machine has been used for a while, it might be necessary to descale it. This can be done using a descaling solution specifically designed for espresso machines. Follow the manufacturer's instructions for descaling. Coffee Grinding:
Ensure the coffee is not ground too finely, as this can create too much pressure and prevent water from flowing. Group Head Pressure:
The dose of coffee in the filter holder should also be appropriate and not exceed the lines on the side of the filter basket. 3. Additional Checks:
Valves:
Most espresso machines use solenoid valves to control water flow. Che
ck that the valves are not blocked or that the pressure switch is working correctly. Machine Reset:
If none of the above steps work, try resetting the machine to factory defaults. This can be done by holding down the steam button for a few seconds and following the instructions on the control panel, according to a YouTube video. https://www.youtube.com/watch?v=2dJRk4KgP7U