good and stable stand for Sony 32" monitor
easy installation for someone who has the necessary tools and basic DIY experience

It does its job, the plugs it has inside to go into the wall are useless. Also, the 2 caps it has to cover the screws on the top and bottom of the base do not fit well and come off very easily from their place.

It does its job well, pay attention those who take it for a monitor stand, the back is quite "thick" and the HDMI cables didn't fit, I had to cut it with a saw but all's well that ends well. Most TVs have the ports on the side so you won't have a problem.

The television weighed 20 kilograms, the stand barely lifted it with the arms showing the effort to keep it on the wall and the screws that adjust the viewing angle broke from the first tightening and did not hold for even 3 minutes. I had to make makeshift fixes from the first five minutes in the hope that it would hold. This particular stand does not inspire any confidence. I did not like it at all and I do not recommend it for televisions weighing more than 10-15 kilograms, and even that is with reservations.

Unfortunately, out of the 4-5 Bratek I had, I was not very satisfied mainly because it lacks satisfactory cable management, and because it does not have rotation around the vertical plane, which I did not notice when purchasing

For the money, the base is perfect. I have bought a similar base from a store for much more money and I was looking for screws for the TV. This one had all the screws and its quality is excellent, and it even comes with installation instructions.

It looks fine..
Although the weight of the TV seems to lean slightly to the right bottom..
I don't know if it's just me or due to imbalance..
But overall, it's a very good stand..
For extra security, I added +1 screw to the holes instead of the 4 that came in the box..
However, the packaging was complete.. It had plenty of screws depending on the TV you have, and the instructions were relatively easy to understand..
My TV took the smallest screws, and I had some doubt about how well they would hold, but it seems relatively okay..
I also needed some plastic rings that it came with to fit the screw heads, as the entire screw didn't fit into the TV's socket..
Other reviewers have described them better in their evaluations..
I struggled a bit with the top/bottom caps, but eventually, they fit with a little pressure.. They probably found the wall (holes)..

Sturdy construction, much more than its price. Easy installation, of course, because I placed it above the bedroom door and the TV is 43 inches, it fit perfectly at the height. Also, due to the height, the tilt is not extremely satisfactory, but I expected that. It would be good to have slightly larger screws for connecting to the device, the ones provided barely fit.

Stable. Moves in all directions. You can pull it away from the wall (over 40cm) and do whatever you want with the cables. A trustworthy choice.

A 32'' television weighing approximately 13kg was installed. The base is stable, sturdy with several viewing angles and overall instills confidence. The television remains aligned as long as the arms that touch the wall bracket are at an angle close to 90 degrees from it. Larger or smaller angles of these two arms may cause slight deviations of the television. The other connections are capable of providing several viewing angle options while keeping the television properly aligned. Personally, I would highly recommend it.

Good value for money. Easily withstands the 10-year-old 40" television that I have installed. It may even withstand much larger ones now that newer televisions are much lighter. The only issue is a slight tilt to the left (due to poor materials in one part of the arm), which is somewhat annoying because it was perfectly aligned using a level. To eliminate this tilt, the support arm would need to be extended significantly outward. And here, you get what you pay for.

If you buy 1 Brateck base, you will definitely get another one.
It is my 3rd base and smaller, but it has nothing to envy from its larger siblings in terms of quality.
In the box, you will find everything from instructions to screws for 5 different types of televisions, and anything else you may need.

Very good base, stable and easy to install (if you read the manual).
If you support it on brick and not on concrete, it would be good to use FISCHER plugs or plugs of similar quality specifically for brick.
In case you have installed a large television, it would be good to use longer plugs - screws, specifically for brick.

Very good stand, solid and sturdy. For Chinese, I did not expect such construction quality to be honest. You can put the TV on the wall where I put it, in many positions (angles) and even at an angle up and down.

Initially, I received the base without the screws that connected the TV to the base. I went to the store and they gave me a different (same) base. I had a lot of difficulty screwing the TV onto the base. I did not use the screws they gave me because they did not fit. I used my own.